Find me an engine mount!

Discuss, ask, or get help with engine and mechanical queries in here.

Moderator: Moderators

Post Reply
User avatar
eoin27
The Irish 406 addict
Posts: 1131
Joined: Fri Nov 30, 2007 2:18 pm
Location: Dublin, Ireland

Find me an engine mount!

Post by eoin27 »

I've been looking on service box for ages and cant find a lower rear offside engine mount for my coupe. My VIN is VF38CRFRExxxxxxxx
If anyone can help it would be great.
2000 D9 Coupé 2.0 SE EW10J4 Scarlet Red - 5 litres of oil gone in 500 miles!!! Time for a new coupe me thinks
User avatar
steve_earwig
Moderator
Posts: 19813
Joined: Thu Oct 04, 2007 6:09 pm
Location: Jastrebarsko, Croatia http://www.jastrebarsko.hr/lokacija/

Re: Find me an engine mount!

Post by steve_earwig »

You sure you have that number right? It just says "vehicle unknown" when I try it.

Lower ear off-side? I thought there was only 3, one each side and one at the back near the eggsauce :?
Unskilled meddling sin©e 2007

The submitted form was invalid. Try submitting again.
User avatar
eoin27
The Irish 406 addict
Posts: 1131
Joined: Fri Nov 30, 2007 2:18 pm
Location: Dublin, Ireland

Re: Find me an engine mount!

Post by eoin27 »

Sorry wiggy. Its VF38CRFRExxxxxxxx

Ya its the one on the bottom anyway. Didnt realise there was only one there
2000 D9 Coupé 2.0 SE EW10J4 Scarlet Red - 5 litres of oil gone in 500 miles!!! Time for a new coupe me thinks
User avatar
steve_earwig
Moderator
Posts: 19813
Joined: Thu Oct 04, 2007 6:09 pm
Location: Jastrebarsko, Croatia http://www.jastrebarsko.hr/lokacija/

Re: Find me an engine mount!

Post by steve_earwig »

Engine - Engine Assembly - Fixing power unit. 180921.

I miss the 'ickle pickies too :(
Unskilled meddling sin©e 2007

The submitted form was invalid. Try submitting again.
User avatar
eoin27
The Irish 406 addict
Posts: 1131
Joined: Fri Nov 30, 2007 2:18 pm
Location: Dublin, Ireland

Re: Find me an engine mount!

Post by eoin27 »

Yep that looks like the one alright. Cheers wiggy. Only a tenner online too! Labour is a bitch with these though isnt it?
2000 D9 Coupé 2.0 SE EW10J4 Scarlet Red - 5 litres of oil gone in 500 miles!!! Time for a new coupe me thinks
User avatar
musso2010
1.8 8v
Posts: 42
Joined: Tue Oct 27, 2009 6:52 pm
Location: West Midlands

Re: Find me an engine mount!

Post by musso2010 »

Is this the one which requires driveshaft removal to fit? Ive gotta do the same one on my saloon, and i am dreading it.

Im sure it can be done with the mount still on the car, with the help of a blow torch and some grease.
406 TURBO

Lowered 80mm
13psi Boost
Bailey Dump Valve
Full Powerflow Stainless System
Induction Kit

good bye MR2's!
User avatar
Captain Jack
3.0 24v
Posts: 3820
Joined: Sun Aug 07, 2005 11:26 am
Location: Langford, Somerset

Re: Find me an engine mount!

Post by Captain Jack »

musso2010 wrote:Is this the one which requires driveshaft removal to fit? Ive gotta do the same one on my saloon, and i am dreading it.

Im sure it can be done with the mount still on the car, with the help of a blow torch and some grease.
I am sure it can be done too, but I spent a day bashing the old one out and another day bashing the new one in. The new one got stuck 5mm in and wouldn't move. Had the car towed to the garage and get them to do it for £100 quid.

Never again..................
2003 - 2008: 1998 Peugeot 406 2.1 TD 110bhp LX Saloon
2008 - 2009: 2004 Honda Accord 2.2 CDTI 136bhp Executive Saloon
2009 - 2013: 2002 Peugeot 406 2.0 HDI 110bhp Executive Saloon
2013 - 2021: 2007 Peugeot 407 2.2 HDI 170bhp Executive Saloon (mapped to 213bhp :twisted:)
2021 - ????: 2016 Ford Mondeo 2.0 TDCi 180bhp Titanium
jasper5
3.0 24v
Posts: 3689
Joined: Fri Nov 28, 2008 1:30 pm

Re: Find me an engine mount!

Post by jasper5 »

Once the driveshaft is out, remove the mounting block from the back of the engine (4bolts)plus the rear bolt, then take it to a local garage that has a press and get them to press the old out and the new in... 10 minute job with a press.
A local engineers that does engine rebuilds would do it as well.
User avatar
eoin27
The Irish 406 addict
Posts: 1131
Joined: Fri Nov 30, 2007 2:18 pm
Location: Dublin, Ireland

Re: Find me an engine mount!

Post by eoin27 »

Ya ill be bringing it to the uncle. Dont think im nearly experienced enough for that kind of a job yet. Especially since I dont have the proper tools.

Might get him to once and for all plug that oil leak thats driving me nuts! Parents got a brand new driveway and i have to park out on the road. I reckon its coming from the gearbox cos its so low down where all the residue is.
2000 D9 Coupé 2.0 SE EW10J4 Scarlet Red - 5 litres of oil gone in 500 miles!!! Time for a new coupe me thinks
User avatar
steve_earwig
Moderator
Posts: 19813
Joined: Thu Oct 04, 2007 6:09 pm
Location: Jastrebarsko, Croatia http://www.jastrebarsko.hr/lokacija/

Re: Find me an engine mount!

Post by steve_earwig »

Get a sheet of cardboard to stuff under it :wink:
Unskilled meddling sin©e 2007

The submitted form was invalid. Try submitting again.
Post Reply