Find me an engine mount!
Moderator: Moderators
Find me an engine mount!
I've been looking on service box for ages and cant find a lower rear offside engine mount for my coupe. My VIN is VF38CRFRExxxxxxxx
If anyone can help it would be great.
If anyone can help it would be great.
2000 D9 Coupé 2.0 SE EW10J4 Scarlet Red - 5 litres of oil gone in 500 miles!!! Time for a new coupe me thinks
- steve_earwig
- Moderator
- Posts: 19813
- Joined: Thu Oct 04, 2007 6:09 pm
- Location: Jastrebarsko, Croatia http://www.jastrebarsko.hr/lokacija/
Re: Find me an engine mount!
You sure you have that number right? It just says "vehicle unknown" when I try it.
Lower ear off-side? I thought there was only 3, one each side and one at the back near the eggsauce
Lower ear off-side? I thought there was only 3, one each side and one at the back near the eggsauce

Unskilled meddling sin©e 2007
The submitted form was invalid. Try submitting again.
The submitted form was invalid. Try submitting again.
Re: Find me an engine mount!
Sorry wiggy. Its VF38CRFRExxxxxxxx
Ya its the one on the bottom anyway. Didnt realise there was only one there
Ya its the one on the bottom anyway. Didnt realise there was only one there
2000 D9 Coupé 2.0 SE EW10J4 Scarlet Red - 5 litres of oil gone in 500 miles!!! Time for a new coupe me thinks
- steve_earwig
- Moderator
- Posts: 19813
- Joined: Thu Oct 04, 2007 6:09 pm
- Location: Jastrebarsko, Croatia http://www.jastrebarsko.hr/lokacija/
Re: Find me an engine mount!
Engine - Engine Assembly - Fixing power unit. 180921.
I miss the 'ickle pickies too
I miss the 'ickle pickies too

Unskilled meddling sin©e 2007
The submitted form was invalid. Try submitting again.
The submitted form was invalid. Try submitting again.
Re: Find me an engine mount!
Yep that looks like the one alright. Cheers wiggy. Only a tenner online too! Labour is a bitch with these though isnt it?
2000 D9 Coupé 2.0 SE EW10J4 Scarlet Red - 5 litres of oil gone in 500 miles!!! Time for a new coupe me thinks
Re: Find me an engine mount!
Is this the one which requires driveshaft removal to fit? Ive gotta do the same one on my saloon, and i am dreading it.
Im sure it can be done with the mount still on the car, with the help of a blow torch and some grease.
Im sure it can be done with the mount still on the car, with the help of a blow torch and some grease.
406 TURBO
Lowered 80mm
13psi Boost
Bailey Dump Valve
Full Powerflow Stainless System
Induction Kit
good bye MR2's!
Lowered 80mm
13psi Boost
Bailey Dump Valve
Full Powerflow Stainless System
Induction Kit
good bye MR2's!
- Captain Jack
- 3.0 24v
- Posts: 3820
- Joined: Sun Aug 07, 2005 11:26 am
- Location: Langford, Somerset
Re: Find me an engine mount!
I am sure it can be done too, but I spent a day bashing the old one out and another day bashing the new one in. The new one got stuck 5mm in and wouldn't move. Had the car towed to the garage and get them to do it for £100 quid.musso2010 wrote:Is this the one which requires driveshaft removal to fit? Ive gotta do the same one on my saloon, and i am dreading it.
Im sure it can be done with the mount still on the car, with the help of a blow torch and some grease.
Never again..................
2003 - 2008: 1998 Peugeot 406 2.1 TD 110bhp LX Saloon
2008 - 2009: 2004 Honda Accord 2.2 CDTI 136bhp Executive Saloon
2009 - 2013: 2002 Peugeot 406 2.0 HDI 110bhp Executive Saloon
2013 - 2021: 2007 Peugeot 407 2.2 HDI 170bhp Executive Saloon (mapped to 213bhp
)
2021 - ????: 2016 Ford Mondeo 2.0 TDCi 180bhp Titanium
2008 - 2009: 2004 Honda Accord 2.2 CDTI 136bhp Executive Saloon
2009 - 2013: 2002 Peugeot 406 2.0 HDI 110bhp Executive Saloon
2013 - 2021: 2007 Peugeot 407 2.2 HDI 170bhp Executive Saloon (mapped to 213bhp

2021 - ????: 2016 Ford Mondeo 2.0 TDCi 180bhp Titanium
Re: Find me an engine mount!
Once the driveshaft is out, remove the mounting block from the back of the engine (4bolts)plus the rear bolt, then take it to a local garage that has a press and get them to press the old out and the new in... 10 minute job with a press.
A local engineers that does engine rebuilds would do it as well.
A local engineers that does engine rebuilds would do it as well.
Re: Find me an engine mount!
Ya ill be bringing it to the uncle. Dont think im nearly experienced enough for that kind of a job yet. Especially since I dont have the proper tools.
Might get him to once and for all plug that oil leak thats driving me nuts! Parents got a brand new driveway and i have to park out on the road. I reckon its coming from the gearbox cos its so low down where all the residue is.
Might get him to once and for all plug that oil leak thats driving me nuts! Parents got a brand new driveway and i have to park out on the road. I reckon its coming from the gearbox cos its so low down where all the residue is.
2000 D9 Coupé 2.0 SE EW10J4 Scarlet Red - 5 litres of oil gone in 500 miles!!! Time for a new coupe me thinks
- steve_earwig
- Moderator
- Posts: 19813
- Joined: Thu Oct 04, 2007 6:09 pm
- Location: Jastrebarsko, Croatia http://www.jastrebarsko.hr/lokacija/
Re: Find me an engine mount!
Get a sheet of cardboard to stuff under it 

Unskilled meddling sin©e 2007
The submitted form was invalid. Try submitting again.
The submitted form was invalid. Try submitting again.