Gaz's 1.9 Turbo Diesel

[Gary406]

i plan to solder all the earth cables together and run them all into a 30amp connector block, then i can run 1 think cable to a point on the body.

Very substantial earth point under the centre console that the dash is earthed to
That's where I earthed mine to

thats plod. is that directly under the radio ?

[plod]

i plan to solder all the earth cables together and run them all into a 30amp connector block, then i can run 1 think cable to a point on the body.

Very substantial earth point under the centre console that the dash is earthed to
That's where I earthed mine to

thats plod. is that directly under the radio ?

yep

[Gary406]

cheers dave

[Gary406]

got these 30 amp inline glass fuses today from halfrauds
there is 30 amp fuses in both so will just leave them in for power to seats if needs be i can put 20amps in
i have used 8 gauge amplifier power cable on this
£7 the pair.

[Gary406]

and this blade fuse holder will house a 20amp fuse for the heated seats .
this is connected to 10 gauge amp power cable

[Gary406]

but the best of all.

my new private plate
i've been waiting a very long time for this - 8 years to be presice

dvla said i will receive my new tax disc and MOT within 7 days . as soon as that arrives i can put the plates on the car.
musnt forget to phone insurance up either .

[waue1978]

Seems sad to most people, but I was quite excited when I got mine. Then a few months later we got W4UEA for my Dad. Will have to get a couple of sets made up with a space between the E & J & the E & A so it looks proper. I know the law states that spacing should be equal, but everybody else gets away with squeezing them up - all I want to do is add an extra space.

[Gary406]

waue. i have always got my plates from this ebay seller.

the plates are mm perfect. they must be done via machine

also you can do the spacing as you please. fk the law i say i've had german style on my car for a while now

http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... K:MEWNX:IT

I'VE JUST DESIGNED AND ORDERED THESE. AS LONG AS THE LETTERS ARE UK SPEC 3D OR CARBON YOU WONT GET PULLED
IVE SEEN LOADS WITH DIFFERENT SPACING .

[Gary406]

do you mean like this ?

[Gary406]

Seems sad to most people, but I was quite excited when I got mine. Then a few months later we got W4UEA for my Dad. Will have to get a couple of sets made up with a space between the E & J & the E & A so it looks proper. I know the law states that spacing should be equal, but everybody else gets away with squeezing them up - all I want to do is add an extra space.

excited ? im more than excited
ive been waiting 8 years for this plate. wasnt bothered which 4 numbers it was just wanted the GAZ

but i think its really weird it has the number 4 ,0 and 6 in it

[waue1978]

Very reasonable price, but any little cosmetic extras will have to wait until I know how much fixing the air con is going to cost.

[Gary406]

ye same here. i need to slow down spending now the miss's is starting to go mad

leather interior with ECU and all cables to fit them - £150
set of 5 black seatbelts - £35
private reg - £400
front discs and pads and pollen filter - £60

work to be carried out by jasper in 2 days as well on top - lower engine mount - rear toplinks about (£40 for mount) (not sure on toplink yet )

and about 500 miles this week collecting all this stuff from sellers.

and i keep wondering why the miss's is moaning

[waue1978]

do you mean like this ?

That's exactly right. & another set for my Dad's with the same space between the E & A.

ye same here. i need to slow down spending now the miss's is starting to go mad

leather interior with ECU and all cables to fit them - £150
set of 5 black seatbelts - £35
private reg - £400
front discs and pads and pollen filter - £60

work to be carried out by jasper in 2 days as well on top - lower engine mount - rear toplinks about (£40 for mount) (not sure on toplink yet )

and about 500 miles this week collecting all this stuff from sellers.

and i keep wondering why the miss's is moaning

Mine isn't too bad with money getting spent on the car as she doesn't have any involvement in motoring costs. She's had her scooter 2 years & never had to fill it up yet (mainly because we're all safer that way), but if ever I buy anything for the car she doesn't complain.

[Gary406]

the only thing with thos plates is they dont have the BSA stamp on .

but as i said in previous post , as long as the letters are uk font 3d or carbon. like the design i did with your number in coppers have no reason to pull you.

well they may do for the spacing but i cant see that being a problem mate. again as long as letters are normal font.

[Gary406]