2.1 td problem starting

Discuss, ask, or get help with engine and mechanical queries in here.

Moderator: Moderators

Post Reply
trell
Newbie
Posts: 3
Joined: Wed Jan 07, 2009 9:56 am

2.1 td problem starting

Post by trell »

Hey guys i have a problem with the big 406.

Last night as i was driving the fuel return pipe came off so i had deisel over the engine wiped as much as i could of. When i got home i degreased and hosed the engine down whilst it was running and it was fine. Started the car an hour later took my mate home then went to the gf 40 mile trip and the car was fine got up went to start the car and its just turning over with no sign of starting.

Things i have done..

Checked for fuel in each injecter - ok
checked fuses and as much of the wiring as i can - ok
fuel in the car - half a tank

i noticed that there is a slight gunge in the coolant tank.

could any one shed some light?? does it sound mechanical or electrical??

all input welcome.

regards Trell
User avatar
mjb
Site Admin
Posts: 7983
Joined: Wed May 31, 2006 9:06 pm
Location: Stoke

Re: 2.1 td problem starting

Post by mjb »

trell wrote:i noticed that there is a slight gunge in the coolant tank.
Not likely to be the cause of the non-starting I don't think (I don't know diseasels), but it is a sign that your head gasket's going.
<steve_earwig> I think this forum is more about keeping our cars going with minimal outlay than giving our cars more reason to go bang
mbell666
3.0 24v
Posts: 642
Joined: Mon Aug 08, 2005 10:11 pm
Location: Cambridge

Re: 2.1 td problem starting

Post by mbell666 »

My guess would have been air locked, but if its getting fuel at the injectors then it shouldn't be that.

As you had problems with the fuel system I'd start by bledding it...
1997 Honda Prelude 2.2 VTi
Previously - 1999 406 Executive HDI
User avatar
steve_earwig
Moderator
Posts: 19813
Joined: Thu Oct 04, 2007 6:09 pm
Location: Jastrebarsko, Croatia http://www.jastrebarsko.hr/lokacija/

Re: 2.1 td problem starting

Post by steve_earwig »

The "hosing the engine down while it's running" I find a bit scarey, all the connectors should be sealed but they ain't perfect...
Unskilled meddling sin©e 2007

The submitted form was invalid. Try submitting again.
Post Reply