First to guess what this is....

It's inevitable, resistance is futile!
User avatar
Doggy
Mod with a 2.2 HDi, De-Fapped!
Posts: 10710
Joined: Mon Oct 13, 2008 11:49 pm
Location: Northants

Re: First to guess what this is....

Post by Doggy »

Welly wrote: I ventured into their 'lounge' last week with something I thought was quite useful to know........bejesus it was like walking into a busy Pub covered head to toe in sh*t, holding a severed Pigs Head in the air. Silence. :frown:
That's nothing - think what will happen if they check this forum. :shock:

(Your signature's bound to have them rolling in the aisles).


.....There's no place like home, is there? :D
2002 HDi 2.2 Exec Estate, (2008-12) (wonderful)
2003 HDi 2.2 6-speed Exec Estate (2012-19) (also a gem)
2009 Citroen C5 2.0 HDi VTR+ Estate (godawful heap)
2008 BMW E91 330i touring (great fun - murdered by a reversing SUV)
2007 BMW E91 325i touring (slower smoother quieter)
User avatar
Bailes1992
Moderator
Posts: 4292
Joined: Mon Dec 24, 2007 4:13 pm
Location: Bridgend, South Wales

Re: First to guess what this is....

Post by Bailes1992 »

When my father ordered his V50 he could choose between 3 different suspension setups.
Standard, Comfort or the 'R-Design suspension package'.
He chose the R-Design which was rock hard and lowered 20mm.

It handled like a total pig considering it has a Focus chassis, god knows how Volvo ruined it.
2020 BMW 520d MSport Touring My Daily
2017 Dacia Logan MCV 1.5DCi Laureate Wifes
1996 Land Rover Defender 90 County SW 300TDi My Toy
2003 Ford Mondeo ST220 3.0 V6 My Other Toy
User avatar
steve_earwig
Moderator
Posts: 19811
Joined: Thu Oct 04, 2007 6:09 pm
Location: Jastrebarsko, Croatia http://www.jastrebarsko.hr/lokacija/

Re: First to guess what this is....

Post by steve_earwig »

Probably by bolting on stuff that looked good on paper, without actually trying it :roll:

Welly dear chap, did you avatar fall into a time warp? I was just searching through posts from a few years back, I saw your old avatar and thought "aww, them were the days" Then I realised. Where's the one with the exhaust lying on the road? That was from when I first joined, before the board got "redesigned", which is what that one's about.
Unskilled meddling sin©e 2007

The submitted form was invalid. Try submitting again.
User avatar
Welly
The moderator formally known as Welton
Posts: 15033
Joined: Tue Jan 10, 2006 12:52 pm
Location: East Midlandfordshire

Re: First to guess what this is....

Post by Welly »

This one?

Image

:supafrisk:
Cars in my care:
2021 Kia Spottage 1.6 Pez Turbo Dual Clutch Gearbox Trickery
2013 Renner Twingo - donkey work
User avatar
steve_earwig
Moderator
Posts: 19811
Joined: Thu Oct 04, 2007 6:09 pm
Location: Jastrebarsko, Croatia http://www.jastrebarsko.hr/lokacija/

Re: First to guess what this is....

Post by steve_earwig »

:cheesy: :cheesy: That's the one.
Unskilled meddling sin©e 2007

The submitted form was invalid. Try submitting again.
User avatar
Welly
The moderator formally known as Welton
Posts: 15033
Joined: Tue Jan 10, 2006 12:52 pm
Location: East Midlandfordshire

Re: First to guess what this is....

Post by Welly »

Well my new springs have just turned up, from Sweden, via the UK :roll:

Image
Cars in my care:
2021 Kia Spottage 1.6 Pez Turbo Dual Clutch Gearbox Trickery
2013 Renner Twingo - donkey work
User avatar
DaiRees
Site Admin
Posts: 5377
Joined: Sat Aug 06, 2005 8:24 am
Location: Merthyr Tydfil, South Wales (God's Country!)

Re: First to guess what this is....

Post by DaiRees »

Doesn't say the company name who made them does it? There's an automotive spring manufacturer a couple of miles up the road from here.
Image
Playtime_Fontayne wrote:"Dai Rees Supplier of Fine Automobilia. Established 2007"
User avatar
Welly
The moderator formally known as Welton
Posts: 15033
Joined: Tue Jan 10, 2006 12:52 pm
Location: East Midlandfordshire

Re: First to guess what this is....

Post by Welly »

No, doesn't say. I buy all my parts from FRF in Swansea (using the special Forum Code) I think I get 10% dissy on stuff.
Cars in my care:
2021 Kia Spottage 1.6 Pez Turbo Dual Clutch Gearbox Trickery
2013 Renner Twingo - donkey work
User avatar
steve_earwig
Moderator
Posts: 19811
Joined: Thu Oct 04, 2007 6:09 pm
Location: Jastrebarsko, Croatia http://www.jastrebarsko.hr/lokacija/

Re: First to guess what this is....

Post by steve_earwig »

Welly wrote:Well my new springs have just turned up, from Sweden, via the UK :roll:
Did you mean from the UK via Sweden? :?

Mind you, there's not much these days that sports that kind of label :frown:
Unskilled meddling sin©e 2007

The submitted form was invalid. Try submitting again.
User avatar
Welly
The moderator formally known as Welton
Posts: 15033
Joined: Tue Jan 10, 2006 12:52 pm
Location: East Midlandfordshire

Re: First to guess what this is....

Post by Welly »

The UK dealer had to ship them in from Schveden, but they were originally made in UK, just one of those funny things. But not so funny when you think of the cost.

They seem nice quality to be fair.
Cars in my care:
2021 Kia Spottage 1.6 Pez Turbo Dual Clutch Gearbox Trickery
2013 Renner Twingo - donkey work
User avatar
steve_earwig
Moderator
Posts: 19811
Joined: Thu Oct 04, 2007 6:09 pm
Location: Jastrebarsko, Croatia http://www.jastrebarsko.hr/lokacija/

Re: First to guess what this is....

Post by steve_earwig »

For your convenience, the cost of shipping it from the UK to Švedska and back again has been added to your bill :roll: Although, perhaps that's what they've told you...
Unskilled meddling sin©e 2007

The submitted form was invalid. Try submitting again.
User avatar
Welly
The moderator formally known as Welton
Posts: 15033
Joined: Tue Jan 10, 2006 12:52 pm
Location: East Midlandfordshire

Re: First to guess what this is....

Post by Welly »

Oo-err this aint working out very well........

First up, the N/S went straight in (1 hour) then the O/S lower control arm bushing was seized....had to be drilled out....then the 'easy out' was used.....then got a new "Ford" [spit] bush....this was too big....ring Volvo....you have to buy the COMPLETE LOWER ARM.......how much?.....£130.00.....so waste of time drilling the old one out....all now scrap.

It's that bit flapping down, holds the coil spring and has 'that' bushing at one end:
Image


Me: "err how long have you spent so far on this job?"

Garage: "quite a lot to be fair"

Me: This is Day 2 now, will I need to borrow "the loaner"** again tonight?

Garage: "no should be ok if the control arm turns up this afternoon, we're turning away MOT customers because your Volvo is effectively stuck on our new expensive ramp"

Me: :oops:

** The 'loaner' is a 20-year old Honda Concerto, auto, have you ever driven a car and felt genuinely scared?......
Cars in my care:
2021 Kia Spottage 1.6 Pez Turbo Dual Clutch Gearbox Trickery
2013 Renner Twingo - donkey work
User avatar
steve_earwig
Moderator
Posts: 19811
Joined: Thu Oct 04, 2007 6:09 pm
Location: Jastrebarsko, Croatia http://www.jastrebarsko.hr/lokacija/

Re: First to guess what this is....

Post by steve_earwig »

Oh blimey :( The only loaner (reminds me of that bit in The Mask) I ever had was a Ni$$an Micra, it was almost new and took about 10 minutes to start my back off. My mate (who was driving it because they were iffy about my UK driving license) took a bit longer before it started his back off. We spent the day thrashing it unmercilessly about ZG ("let's see how high we can get the fuel consumption") but when we went to fill it up before taking it back we couldn't work out how to get the fuel flap open. We went back and asked how to open it but they guy said not to worry as he was sure we couldn't have used that much fuel :supafrisk:

Hope they manage to figure it out soon anyway.
Unskilled meddling sin©e 2007

The submitted form was invalid. Try submitting again.
User avatar
Welly
The moderator formally known as Welton
Posts: 15033
Joined: Tue Jan 10, 2006 12:52 pm
Location: East Midlandfordshire

Re: First to guess what this is....

Post by Welly »

Just popped round to check progress and yet another bush has siezed at the other end of the arm so it needs cutting off and we can't get another new bolt until tomorrow.........DAY 3 :shock:

AND the supposed 'Volvo Dealer Only' control arm has FoMoCo stamped all over it :frown:

Basically pretty much every bolt/bush/anything on the back end is corroded. I can see me crawling under there soon and giving the thing a good clean up and coat of something? to seal it.

So I will indeed be doing a 'Stanley Ipkiss' and taking the loaner home tonight :(
Cars in my care:
2021 Kia Spottage 1.6 Pez Turbo Dual Clutch Gearbox Trickery
2013 Renner Twingo - donkey work
User avatar
Captain Jack
3.0 24v
Posts: 3820
Joined: Sun Aug 07, 2005 11:26 am
Location: Langford, Somerset

Re: First to guess what this is....

Post by Captain Jack »

I thought Vulvas were reliable?
2003 - 2008: 1998 Peugeot 406 2.1 TD 110bhp LX Saloon
2008 - 2009: 2004 Honda Accord 2.2 CDTI 136bhp Executive Saloon
2009 - 2013: 2002 Peugeot 406 2.0 HDI 110bhp Executive Saloon
2013 - 2021: 2007 Peugeot 407 2.2 HDI 170bhp Executive Saloon (mapped to 213bhp :twisted:)
2021 - ????: 2016 Ford Mondeo 2.0 TDCi 180bhp Titanium
Post Reply