Hi!
/Sorry for my english..im from hungary /
My car 1999 S2 HDi RHY, I bought a new MFD with Trip Computer i want to install to my car.
Before i wrote here i search older topics ..bit i cant find what im looking for.
So the problem: In my washer switch i dont have the button to change information on the display. I want to use a new push button to do this. When i remove the cables from it i see the two pin..but there isn't any cables for me. I post pictures down.
So the first question the two missing cables: Where are they from (maybe from ecu and bsi) ? Any number? And how?
Trip Computer D9 Installing HELP need!
Moderator: Moderators
Trip Computer D9 Installing HELP need!
- Attachments
-
- 22886178_1586793581381390_6161810807493300122_n.jpg
- (71.46 KiB) Downloaded 25 times
-
- 22894042_1586793551381393_6913933791290479926_n.jpg
- (136.47 KiB) Downloaded 25 times
-
- 22886213_1586793531381395_6008851255874485308_n.jpg
- (138.63 KiB) Downloaded 25 times
-
- 23167925_1586793504714731_823891846486677722_n.jpg
- (81.18 KiB) Downloaded 25 times
- steve_earwig
- Moderator
- Posts: 19799
- Joined: Thu Oct 04, 2007 6:09 pm
- Location: Jastrebarsko, Croatia http://www.jastrebarsko.hr/lokacija/
Re: Trip Computer D9 Installing HELP need!
Hi there, welcome
Yes, one leg goes to the BSI (the other is just an earth) which is a pain. The diagram shows it going in on a 12-way brown connector (pin 1). I guess the next step depends on how brave you're feeling
Yes, one leg goes to the BSI (the other is just an earth) which is a pain. The diagram shows it going in on a 12-way brown connector (pin 1). I guess the next step depends on how brave you're feeling
Unskilled meddling sin©e 2007
The submitted form was invalid. Try submitting again.
The submitted form was invalid. Try submitting again.
Re: Trip Computer D9 Installing HELP need!
Thx! I Find it! It's works now. After This I find the cable on my ECU no:1368 it goes to Brown Connector Pin 9.steve_earwig wrote:Hi there, welcome
Yes, one leg goes to the BSI (the other is just an earth) which is a pain. The diagram shows it going in on a 12-way brown connector (pin 1). I guess the next step depends on how brave you're feeling
ALL OK NOW ! Wait for my PP2000 to activate Trip Computer.
(Just the outside temp not working now ... i search for how to connect the sensor...im not found any cables behind de right door panel Only the heated mirror cable)