Dashboard multifunction display??

Talk about the 406's electrical system, what wires do what, how to add extra functionality, etc.

Moderator: Moderators

Post Reply
User avatar
406IT
1.8 16v
Posts: 56
Joined: Thu Jan 28, 2010 12:25 am

Dashboard multifunction display??

Post by 406IT »

Hey guys - I have the 97 LX which does not have a multifunction display as standard - When i removed the little tray in the dash i noticed there is the wiring for one - Is it a case of just plugging one in and it will work - If so which one to get as on ebay there seems to be a few types - or is it more complicated than that? and are they worth having?
-------------------------------------------
1997 406 1.9TD Estate
1989 BMW 735iSE Auto
2002 Mazda Premacy Sport
teamster1975
Site Admin & Mad Biker!
Posts: 6277
Joined: Sun Oct 28, 2007 8:07 pm
Location: Woking, Surrey

Re: Dashboard multifunction display??

Post by teamster1975 »

If you've got the petrol model then yes you can retrofit full trip computer functionality.
It will also display outside temp but you'll either have to retrofit electric wing mirrors (another very worthwhile project!) or botch a sensor into your existing one.

It involves a lot of splicing but it's well worth it in my opinion! Myself and mjb have done it, have a search in the electrical thread for trip computer installation.
1996 406 1.8LX Got a bad case of hydro lock!
1996 406 Executive 2.0 Turbo XU10J2TE No longer hangin' on in there :(
1997 Honda CB500V
2003 Volvo V40 1.8 GDi SE killed by a nutter in a beemer 5 series
2008 Mondeo 2.0 TDCi Titanium X

"Always look on the bright side of life, dedo, dedo dedodedo"
User avatar
406IT
1.8 16v
Posts: 56
Joined: Thu Jan 28, 2010 12:25 am

Re: Dashboard multifunction display??

Post by 406IT »

Hi mine is a 97 1.9 diesel Estate LX- when i take out the little storage area where the multifunction display would fit - the wiring is there but didnt know if it would work..
-------------------------------------------
1997 406 1.9TD Estate
1989 BMW 735iSE Auto
2002 Mazda Premacy Sport
User avatar
steve_earwig
Moderator
Posts: 19800
Joined: Thu Oct 04, 2007 6:09 pm
Location: Jastrebarsko, Croatia http://www.jastrebarsko.hr/lokacija/

Re: Dashboard multifunction display??

Post by steve_earwig »

You could fit it but it wouldn't give you any fuel type information, no mpg etc.
Unskilled meddling sin©e 2007

The submitted form was invalid. Try submitting again.
teamster1975
Site Admin & Mad Biker!
Posts: 6277
Joined: Sun Oct 28, 2007 8:07 pm
Location: Woking, Surrey

Re: Dashboard multifunction display??

Post by teamster1975 »

406IT wrote:Hi mine is a 97 1.9 diesel Estate LX- when i take out the little storage area where the multifunction display would fit - the wiring is there but didnt know if it would work..
The existing loom will only power up the screen, nothing else. It'll just show dashes because there are no signal inputs.
1996 406 1.8LX Got a bad case of hydro lock!
1996 406 Executive 2.0 Turbo XU10J2TE No longer hangin' on in there :(
1997 Honda CB500V
2003 Volvo V40 1.8 GDi SE killed by a nutter in a beemer 5 series
2008 Mondeo 2.0 TDCi Titanium X

"Always look on the bright side of life, dedo, dedo dedodedo"
User avatar
406IT
1.8 16v
Posts: 56
Joined: Thu Jan 28, 2010 12:25 am

Re: Dashboard multifunction display??

Post by 406IT »

ah right - not much point in fitting one then unless i can get something to show on it..
-------------------------------------------
1997 406 1.9TD Estate
1989 BMW 735iSE Auto
2002 Mazda Premacy Sport
teamster1975
Site Admin & Mad Biker!
Posts: 6277
Joined: Sun Oct 28, 2007 8:07 pm
Location: Woking, Surrey

Re: Dashboard multifunction display??

Post by teamster1975 »

406IT wrote:ah right - not much point in fitting one then unless i can get something to show on it..
Funnily enough that's how I got the bug to wire mine in when I discovered that connector!
1996 406 1.8LX Got a bad case of hydro lock!
1996 406 Executive 2.0 Turbo XU10J2TE No longer hangin' on in there :(
1997 Honda CB500V
2003 Volvo V40 1.8 GDi SE killed by a nutter in a beemer 5 series
2008 Mondeo 2.0 TDCi Titanium X

"Always look on the bright side of life, dedo, dedo dedodedo"
User avatar
406IT
1.8 16v
Posts: 56
Joined: Thu Jan 28, 2010 12:25 am

Re: Dashboard multifunction display??

Post by 406IT »

well another thing to add to my list..
-------------------------------------------
1997 406 1.9TD Estate
1989 BMW 735iSE Auto
2002 Mazda Premacy Sport
telephonic
Newbie
Posts: 5
Joined: Sat Oct 31, 2015 9:52 am

Re: Dashboard multifunction display??

Post by telephonic »

Hi, I have the 1.9 saloon (1998). I have fitted the multifunction display and as someone here has already said, it only powers up the screen however it does show --- flashing with the degrees Celsius sign in the top right corner . I was rather hoping though that when I fit the electric mirrors (fingers crossed the wiring is pre-fitted as I haven't yet checked) it will show me the external temperature. any ideas?

Thanks
Luke
8Jb9
2.0 16v
Posts: 127
Joined: Wed Apr 25, 2012 5:48 pm

Re: Dashboard multifunction display??

Post by 8Jb9 »

i would guess that you need to enable it in PP2000. Have you got access to it?
Post Reply