Rear disc brake backplates

[elton38]

Hello everyone this is my first post,

I used to own a 51plate 3.0v6 coupe but now being a family man, own a 406 estate! Missing the power and braking capacity thou!!

Does anyone know where I can get a pair of rear disc brake backplates from? Cheapest so far is Peugeot at £90 odd ponds each.

I have been trying to buy used ones but have had no luck so far!!

Cheers

Steve (elton38)

[dirtydirtydiesel]

But bet is ade the coupe breaker but I seem to think he's out of them at the moment

[GingerMagic]

Hi Steve - I'm afraid these are the proverbial 'Hen's teeth' so you may need to repair/rebuild the plates you have.

If your handbrake pins keep pulling through - a nut and countersunk bolt will do the trick, if the plates are starting to split - filler and good preserver paint ( zinc etc ) will have to do until a good set come up.....

These are the correct ones for rear disc/drum combo; the part numbers are 4211 81, and 4212 81
http://www.ebay.co.uk/itm/Peugeot-406-C ... SwgQ9VgUt7


Theses are for rear drums only;
http://www.ebay.co.uk/itm/Genuine-Peuge ... Swd0BV0eCU

Keep looking - you are not the first to enquire, nor will you be the last...

[elton38]

But bet is ade the coupe breaker but I seem to think he's out of them at the moment

Thanks for the reply; i'll keep looking and maybe try Ade in a bit.

cheers

Steve

[elton38]

Hi Steve - I'm afraid these are the proverbial 'Hen's teeth' so you may need to repair/rebuild the plates you have.

If your handbrake pins keep pulling through - a nut and countersunk bolt will do the trick, if the plates are starting to split - filler and good preserver paint ( zinc etc ) will have to do until a good set come up.....

These are the correct ones for rear disc/drum combo; the part numbers are 4211 81, and 4212 81
http://www.ebay.co.uk/itm/Peugeot-406-C ... SwgQ9VgUt7


Theses are for rear drums only;
http://www.ebay.co.uk/itm/Genuine-Peuge ... Swd0BV0eCU

Keep looking - you are not the first to enquire, nor will you be the last...

Thanks V much that's helped me lots. i think i'll try the repairs this weekend (if i can get the time!) The part no's are a good help too as i was having trouble finding them.

cheers

Steve