1997 Peugeot 406 1.9TD Rear door.

Discuss the 406's Bodywork stuff in here (what parts fit what, what can be interchanged with what etc etc).

Moderator: Moderators

Post Reply
samwires
Newbie
Posts: 9
Joined: Tue Aug 23, 2011 7:10 pm

1997 Peugeot 406 1.9TD Rear door.

Post by samwires »

Hi everyone!
So I've had my Pug 6 years, 195,000 mainly trouble free miles, anyway, someone decided to run into the side of me the other day and I need a new rear passenger door. The door from my year is, as you can imagine, proving elusive so I was wondering if other models/years would fit? I'm not too fussed if it matches or not (I quite like the battle scars it's picked up) however, I imagine later models have electric windows so is this an issue?

Many Thanks

Sam
User avatar
steve_earwig
Moderator
Posts: 19798
Joined: Thu Oct 04, 2007 6:09 pm
Location: Jastrebarsko, Croatia http://www.jastrebarsko.hr/lokacija/

Re: 1997 Peugeot 406 1.9TD Rear door.

Post by steve_earwig »

They're the same, they have the same part numbers, there's only the option for with or without side impact protection which I don't think will be too much of a worry. The only difference I noticed on my two is how the weather strip is held on (on the outside against the glass, the D8 just had a clip while the D9 has a pop rivet). If you get one from a D9 you'll have to transfer the handle bracket over but they're only held on by pop rivets.
Unskilled meddling sin©e 2007

The submitted form was invalid. Try submitting again.
samwires
Newbie
Posts: 9
Joined: Tue Aug 23, 2011 7:10 pm

Re: 1997 Peugeot 406 1.9TD Rear door.

Post by samwires »

Ok, thanks for that.

Will this do the job then?

http://www.ebay.co.uk/sch/i.html?_from= ... c=50&rt=nc

I'm assuming it will only be the panel and I'll have to put the interior bits from my current door.

Many thanks

Sam
samwires
Newbie
Posts: 9
Joined: Tue Aug 23, 2011 7:10 pm

Re: 1997 Peugeot 406 1.9TD Rear door.

Post by samwires »

OK, and this is me being thick, if I get a door with electric windows then that window will never open?

Again, thanks

Sam
GingerMagic
3.0 24v
Posts: 3569
Joined: Fri Apr 06, 2012 9:02 pm
Location: Bournemouth

Re: 1997 Peugeot 406 1.9TD Rear door.

Post by GingerMagic »

Hi, the wind-up window mech looks like this...
http://www.ebay.co.uk/itm/Peugeot-406-M ... hTglxWblmg

The electric window mech looks like this;
http://www.ebay.co.uk/itm/PEUGEOT-406-1 ... SwcF9UU2It

It looks the same apart from the motor - as far as I can see even the bolt locations are the same so you may be able to remove the electric window motor and replace with your manual winder.

If you are local to me, and you want an estate rear door I can supply you with one :cheesy:
2003 2.2hdi estate - mine
1998 Volvo 940 auto estate - also mine
2019 Citroen C3 something - the wife's
PP2000 user, can help with faults / diagnostics in the Bournemouth area.
samwires
Newbie
Posts: 9
Joined: Tue Aug 23, 2011 7:10 pm

Re: 1997 Peugeot 406 1.9TD Rear door.

Post by samwires »

Aah, right, so it's not that different.

Will an estate rear door fit? Is it that colour?

Sam
User avatar
steve_earwig
Moderator
Posts: 19798
Joined: Thu Oct 04, 2007 6:09 pm
Location: Jastrebarsko, Croatia http://www.jastrebarsko.hr/lokacija/

Re: 1997 Peugeot 406 1.9TD Rear door.

Post by steve_earwig »

You'd have to cut off the bit that goes around the window and swap them over, that's what's different.

There are no separate part numbers for with or without electric windows, just the crash bar, so the mechanism will swap across.
Unskilled meddling sin©e 2007

The submitted form was invalid. Try submitting again.
samwires
Newbie
Posts: 9
Joined: Tue Aug 23, 2011 7:10 pm

Re: 1997 Peugeot 406 1.9TD Rear door.

Post by samwires »

Do I have to cut the bit round the window for aesthetics or because it won't fit otherwise. If you hadn't already guessed I know nothing about this sort of stuff!

Thanks

Sam
samwires
Newbie
Posts: 9
Joined: Tue Aug 23, 2011 7:10 pm

Re: 1997 Peugeot 406 1.9TD Rear door.

Post by samwires »

Sorry, I put the wrong link

http://www.ebay.co.uk/itm/PEUGEOT-406-4 ... Sw7ThUkx23

Thanks

Sam
User avatar
steve_earwig
Moderator
Posts: 19798
Joined: Thu Oct 04, 2007 6:09 pm
Location: Jastrebarsko, Croatia http://www.jastrebarsko.hr/lokacija/

Re: 1997 Peugeot 406 1.9TD Rear door.

Post by steve_earwig »

That seems to be just the handle :?

Mate, the estate door has a different shape window frame, even though the body of the door is the same you don't want one as it would be a lot of work. Go for any 406 saloon passenger side rear door as they're all the same, you might have to move some of the furniture about but it won't require any special tools, maybe the pop rivet gun but they sell them in supermarkets here.
Unskilled meddling sin©e 2007

The submitted form was invalid. Try submitting again.
GingerMagic
3.0 24v
Posts: 3569
Joined: Fri Apr 06, 2012 9:02 pm
Location: Bournemouth

Re: 1997 Peugeot 406 1.9TD Rear door.

Post by GingerMagic »

I have just spent time today replacing my rear door from a donor car and I can confirm that the electric windows and manual windows are interchangeable. My replacement door had manual windows so I need to remove the internals, and the wiring loom and change it across.

Try to get a D8 door though, for convenients sake.
2003 2.2hdi estate - mine
1998 Volvo 940 auto estate - also mine
2019 Citroen C3 something - the wife's
PP2000 user, can help with faults / diagnostics in the Bournemouth area.
Post Reply