Bent sills...

[Captain Jack]

Working on my car over the past few days, I noticed that the jacking point is bent and that someone (me) tried to jack the car up using the "lip" next to the jacking points - bending them and exposing metal. It seems to be some rubbery coating - is it some underseal type stuff? Can I just hammer the "lips" back inline and cover them with this underseal and it will OK?

.....wishful thinking there.

[steve_earwig]

I guess so, if you can find something like Pug used - you may have to do what I did, which was wander along to the local paint store, point at it and say "ug?" Then fill the sills with something like Waxoyl.

[Welly]

Bitumastic paint should do the trick, kinda 'soft' and warty repellent.


Oh and cheers for the Sig!

[Captain Jack]

Oh and cheers for the Sig!

Well, I don't know what they are called...

Here are the pics of the sills.. or the er.. things under the sills.

[Welly]

Oh and cheers for the Sig!

Well, I don't know what they are called...

My copying of the sig was for other reasons, a double entendre if you will - read it and think of something else

[lozz]

Pull back what you can with a pair a molegrips,
block of wood and hammer might help too,

[Captain Jack]

My copying of the sig was for other reasons, a double entendre if you will - read it and think of something else

Oh yes, I realise that. I am not totally innocent

Pull back what you can with a pair a molegrips,
block of wood and hammer might help too,

Yep, will give that a go.

[steve_earwig]

With the other half of the double entendre in mind, now read Lozz's post above.

Btw I think I just worked out why you're called Captain Jack...

[Captain Jack]