Yet another bodywork question! Sorry!
I'm refering to the long piece that runs along the top of the sill on each side (visible when you open any door)
The clips all along the area on the drivers door part have broke, this leaves the trim bulging out and its getting worse obviously with me getting in and out my pug.
Is it possible to buy the clips from the dealers, or even the whole rubber trim part? As they both look a bit worse for wear.
Thanks for looking guys
Rubber seal along the sill
Moderator: Moderators
-
- Site Admin & Mad Biker!
- Posts: 6277
- Joined: Sun Oct 28, 2007 8:07 pm
- Location: Woking, Surrey
Re: Rubber seal along the sill
Very common fault, the clips cost pence from the dealer luckily!
1996 406 1.8LX Got a bad case of hydro lock!
1996 406 Executive 2.0 Turbo XU10J2TE No longer hangin' on in there
1997 Honda CB500V
2003 Volvo V40 1.8 GDi SE killed by a nutter in a beemer 5 series
2008 Mondeo 2.0 TDCi Titanium X
"Always look on the bright side of life, dedo, dedo dedodedo"
1996 406 Executive 2.0 Turbo XU10J2TE No longer hangin' on in there
1997 Honda CB500V
2003 Volvo V40 1.8 GDi SE killed by a nutter in a beemer 5 series
2008 Mondeo 2.0 TDCi Titanium X
"Always look on the bright side of life, dedo, dedo dedodedo"
- steve_earwig
- Moderator
- Posts: 19799
- Joined: Thu Oct 04, 2007 6:09 pm
- Location: Jastrebarsko, Croatia http://www.jastrebarsko.hr/lokacija/
Re: Rubber seal along the sill
The clips and rubbers are available separately, worth replacing as water can get in the sill...
Unskilled meddling sin©e 2007
The submitted form was invalid. Try submitting again.
The submitted form was invalid. Try submitting again.
- neildavies
- 3.0 24v
- Posts: 1052
- Joined: Wed Aug 17, 2005 1:00 pm
- Location: South Wales, UK
Re: Rubber seal along the sill
aw, brings back fond memories of my saloon. Yep, I think every 4 door 406 has this problem,
Neil
Neil
2007 Mondeo Titanium X 2.0 TDCi
2007 307cc Sport 2.0 HDi 136
Gone but never forgotten: 2002 406 Coupe SE 2.2 HDi
2007 307cc Sport 2.0 HDi 136
Gone but never forgotten: 2002 406 Coupe SE 2.2 HDi
Re: Rubber seal along the sill
iirc, the rubber strips are £25 each and the clips are 6p each (come in bags of 50)
19 clips per side
before refitting, it would be adviseable to spray some waxoyl in the holes along the sill, to help prevent the dreaded tin worm
19 clips per side
before refitting, it would be adviseable to spray some waxoyl in the holes along the sill, to help prevent the dreaded tin worm
Re: Rubber seal along the sill
I work in the sign industry and we have some pretty cool tapes we use. I used this stuff:
http://affixit.co.uk/toffee-tape/toffee ... 2mm-p-1382
to stick my rubber seals back on and they most certainly wont come off now!
The beauty of tape is no messy glue dripping everywhere and waiting for it to dry and also its fully watertight as the tape covers the full length, not just in places like the clips. A word of caution though, get it all in place before removing the backing paper as it sticks like Sh*t to a blanket.
http://affixit.co.uk/toffee-tape/toffee ... 2mm-p-1382
to stick my rubber seals back on and they most certainly wont come off now!
The beauty of tape is no messy glue dripping everywhere and waiting for it to dry and also its fully watertight as the tape covers the full length, not just in places like the clips. A word of caution though, get it all in place before removing the backing paper as it sticks like Sh*t to a blanket.
Currently frustrated by: 2002 2.2HDi Executive Saloon