2.0 hdi rhy

Welcome to the 406 Owners Club (406oc.co.uk and pug406.co.uk). If you havn't registered, you can post in here, and find out what the site is all about!

Moderator: Moderators

Post Reply
ibrahim1134
Newbie
Posts: 1
Joined: Sun Dec 19, 2021 6:14 pm

2.0 hdi rhy

Post by ibrahim1134 »

Hello dear 406 users. I became a member because I could not find a solution on the Citroen pages. I had xsara 2.0 hdi 90 hp hybrid turbo fitted to the owner's vehicle. However, the vehicle does not have a map sensor. I can't depressurize with software. How can I turn on pressure
batrst
1.8 8v
Posts: 38
Joined: Sat Jan 16, 2021 3:13 pm

Re: 2.0 hdi rhy

Post by batrst »

ibrahim1134 wrote: Sun Dec 19, 2021 6:23 pm Hello dear 406 users. I became a member because I could not find a solution on the Citroen pages. I had xsara 2.0 hdi 90 hp hybrid turbo fitted to the owner's vehicle. However, the vehicle does not have a map sensor. I can't depressurize with software. How can I turn on pressure
what do you mean I can't depressurize

what make boost ? what turbo you fitted
GingerMagic
3.0 24v
Posts: 3569
Joined: Fri Apr 06, 2012 9:02 pm
Location: Bournemouth

Re: 2.0 hdi rhy

Post by GingerMagic »

Peugeot and Citroen use vacuum to actuate the solenoids to open/close the wastegate, egr etc.

The 90bhp models have mechanical opening turbos, whereas the 110bhp uses the ECU to read certain parameters before opening or closing the wastegate.

I'm not sure how to get the hybrid system to work, but on my Volvo I fitted a manual boost controller, and a boost gauge to monitor what was happening - but the Volvo uses boost, not vacuum......

Unless there is a manual vacuum controller available?
2003 2.2hdi estate - mine
1998 Volvo 940 auto estate - also mine
2019 Citroen C3 something - the wife's
PP2000 user, can help with faults / diagnostics in the Bournemouth area.
batrst
1.8 8v
Posts: 38
Joined: Sat Jan 16, 2021 3:13 pm

Re: 2.0 hdi rhy

Post by batrst »

have you a pic of the turbo . you can run actuator pressure or you want to up the pressure
Post Reply