which looks like this
![Arrow Down :arrowd:](./images/smilies/icon_arrowd.gif)
![Image](https://i.imgur.com/OJSvVSi.jpg)
the temp display simply wires up to the time clock with 3 small wires .
ok on the time clock there is 4 wires (all are numbered) 1 to 4
on the plug for the temperature display there are about 10 or so. but ignore half of them (again they are all numbered)very small but you will see
3 wires is all you need to link the time clock to the temperature display
wire 2 on the time clock goes to wire 2 on the temp display
wire 3 on the time clock goes to wire 3 on the temp display
wire 4 on the time clock goes to wire 5 on the temp display
them 3 steps will give you power to the temp display and it will even dim with the time clock when you turn extrior lights on
![Mr. Green :mrgreen:](./images/smilies/icon_mrgreen.gif)
the temperature probe that can go anywere you like as long as its outside (but is located in passanger wing mirrors as standard)
the temperature probe connects to wires 6 and 7 on the back of the temperature display .
i will locate my temp probe in the front wheel arch liner. basically inside the front bumper away from wind blast and any heat off the engine