Glow plug relay renewal

Knowledge Base Articles

Moderator: Moderators

Locked
User avatar
karlosantana
1.8 8v
Posts: 30
Joined: Wed Oct 13, 2010 9:01 am
Location: Swansea, Wales

Glow plug relay renewal

Post by karlosantana »

You will need
Image
* 10mm socket
* 10mm spanner
* 8mm socket
* Ratchet
It's fairly simple, this needs doing if your getting a long start before the glow plug light goes off, or in my case was going off too soon.
It's located on the right hand side on the 1.9dt sorry dont know where it is on other models. Its under a plack plate like below
Image
Now you'll see a 10mm bolt on the left handside of that photo, remove it catch the bolt!
You'll then have this!
Image
Simply replace it, it has two nuts, one 8mm the other 10mm undo them unplug the plug. Fitting is reverse of removal, job jobbed :D
Cheers
Kyle
Last edited by steve_earwig on Wed Oct 20, 2021 5:09 pm, edited 2 times in total.
Reason: Pics moved to imgur
User avatar
karlosantana
1.8 8v
Posts: 30
Joined: Wed Oct 13, 2010 9:01 am
Location: Swansea, Wales

Re: Glow plug relay renewal

Post by karlosantana »

Again is it possible we can have this put on the Knowledge basey thingy please?
Cheers
Kyle
Locked