12 volt feed from the battery into the cabin

Knowledge Base Articles

Moderator: Moderators

Locked
FarmerPug
2.0 HDI 110
Posts: 9656
Joined: Tue Jun 01, 2010 5:42 pm
Location: The Countryside, Northern Ireland
Contact:

12 volt feed from the battery into the cabin

Post by FarmerPug »

I got the 12v feed from the battery into the cabin at last. The wire, insulation tape, and cable ties for £5 ebay cant beat that.
So a big screwdriver had to be pushed into the hole where the wires come through the bulkhead,
Image
it needs plenty of swivelling about to make the hole big enough for the wire to pass through and even then it takes a very hard push to get it through, once through the hard parts over, just pull the wire out the other side:
Image
And then its a case of using cable ties to get it over to the battery, i just used the big thick wire on the bulkhead to tie them onto:
Image
When i got the wire into the battery box, i put on some hoop ends onto the wires and put them onto the two terminals:
Image

Image
And that's a good 12v feed in the car now. Ill be able to use it for the footwell lights but also anything else that i want to add inside the car without buggering up the BSI
Last edited by steve_earwig on Wed Oct 20, 2021 5:17 pm, edited 2 times in total.
Reason: Pics moved to imgur
Locked