A/C clutch replacement needed but keyed not splined
Posted: Fri Jun 19, 2020 6:40 pm
Hi After a remendous battle trying to get the clutch off my air con I discovered it was not splined as most shown
on Ebay but had a keyway. It was rusted up and took me 2 hours just get it off. I had been searching for clutch repacement on Ebay but every one I saw showed splines. Even on Utube showing clutch replacemnet they were all
splined an seemed to come off quite easily. When I check compatibily it shows as being compatible, but of course
it isn't.
If anyone can point me in the right direction I would be really gratefull. Being long retired I cannot afford a new compressor.
My 406 is a 2000 with just 130,000 on the clock. It is 8E/F 2.0 HDI 110 estate. The part number on the compressor is 1135290.
I'm keeping my fingers crossed.
Cheers Tony
on Ebay but had a keyway. It was rusted up and took me 2 hours just get it off. I had been searching for clutch repacement on Ebay but every one I saw showed splines. Even on Utube showing clutch replacemnet they were all
splined an seemed to come off quite easily. When I check compatibily it shows as being compatible, but of course
it isn't.
If anyone can point me in the right direction I would be really gratefull. Being long retired I cannot afford a new compressor.
My 406 is a 2000 with just 130,000 on the clock. It is 8E/F 2.0 HDI 110 estate. The part number on the compressor is 1135290.
I'm keeping my fingers crossed.
Cheers Tony