trying to get a quick answer !!!!!
my guy at the garage is fitting a new radiator and bottom and top hose
He says he cannot get the bottom hose to seal , just pouring out !!!!
Is there a extra rubber seal in the entry or something ???? HELP !!!!!
hdi bottom radiator hose seal
Moderator: Moderators
-
steve_earwig
- Moderator
- Posts: 19799
- Joined: Thu Oct 04, 2007 6:09 pm
- Location: Jastrebarsko, Croatia http://www.jastrebarsko.hr/lokacija/
Re: hdi bottom radiator hose seal
There's meant to be an o-ring there,
14 - 1339 94 RING-SEAL DIAM INT 31 EP 3,6
14 - 1339 94 RING-SEAL DIAM INT 31 EP 3,6
- Attachments
-
oring.jpg- (73.71 KiB) Not downloaded yet
Unskilled meddling sin©e 2007
The submitted form was invalid. Try submitting again.
The submitted form was invalid. Try submitting again.
Re: hdi bottom radiator hose seal
thanks steve for the info,
apparently the new bottom hose came with a O-ring but still did not seal it so he had to use sealer to make it water tight ! , seems ok but will keep on eye on it for a while
I there any size variations over the years, mine is 2001 may 2.0 hdi 110
apparently the new bottom hose came with a O-ring but still did not seal it so he had to use sealer to make it water tight ! , seems ok but will keep on eye on it for a while
I there any size variations over the years, mine is 2001 may 2.0 hdi 110
-
steve_earwig
- Moderator
- Posts: 19799
- Joined: Thu Oct 04, 2007 6:09 pm
- Location: Jastrebarsko, Croatia http://www.jastrebarsko.hr/lokacija/
Re: hdi bottom radiator hose seal
Nope, they're all the same (even the 2.2 saloon/estate)
Maybe the o-ring isn't up to the job
I'm not sure what the 3,6 is, maybe the thickness of the o-ring?
Maybe the o-ring isn't up to the job
I'm not sure what the 3,6 is, maybe the thickness of the o-ring?Unskilled meddling sin©e 2007
The submitted form was invalid. Try submitting again.
The submitted form was invalid. Try submitting again.