Page 1 of 1

universal induction filter cone type

Posted: Wed Aug 07, 2013 11:27 pm
by tonko007
Hi all I have a peugeot 406 2.2 hdi can I fit a universal induction kit or will it stuff the engine also does the 2.2 hdi 2002 have a dump valve many thanks paul

Re: universal induction filter cone type

Posted: Thu Aug 08, 2013 3:25 am
by lozz
tonko007 wrote:Hi all I have a peugeot 406 2.2 hdi can I fit a universal induction kit or will it stuff the engine also does the 2.2 hdi 2002 have a dump valve many thanks paul
Hi mate.
You shouid be able to fit a u/v induction kit on the 2.2 .
Never heard of any hdi having a dump valve standard perhaps you couid fit one tho.

Re: universal induction filter cone type

Posted: Thu Aug 08, 2013 5:04 am
by tonko007
Only really want to fit one as we get a lot of floods where I live and looks better than the horrible air box and the reason I ask about the dump valve was because I get a little toss when changing gear thanks paul

Re: universal induction filter cone type

Posted: Thu Aug 08, 2013 4:23 pm
by lozz
Hi mate.
If your geting a slight tshh noise you may have a slight boost leak
Leaky pipe somewhere perhaps..

Idont think they fitted em with dump valves

But I might be wrong,

Doggy might know the correct answer, as he's well clued up on the 2.2.

Regards lozz.

Re: universal induction filter cone type

Posted: Thu Aug 08, 2013 7:22 pm
by davew
they don't have dump valves they don't work on diesels.

Re: universal induction filter cone type

Posted: Thu Aug 08, 2013 7:27 pm
by GingerMagic
A chap at work has an induction kit on his 306, I will have it when hes finished with it ( he will crash soon ) and I will put it in my air box but cut the top off the box. This way the cold air is still passed up the feed from the wheel arch ( no hot air going in ) but if flooded it can breath through the cut-out in the air box.
Sounds good in theory... :idea:

Re: universal induction filter cone type

Posted: Thu Aug 08, 2013 7:40 pm
by lozz
GingerMagic wrote:A chap at work has an induction kit on his 306, I will have it when he's finished with it ( he will crash soon )

That's not nice is it.... :D :lol:

Re: universal induction filter cone type

Posted: Thu Aug 08, 2013 8:06 pm
by GingerMagic
You haven't seen his driving! - He could probably crash when stationary.....

Re: universal induction filter cone type

Posted: Thu Aug 08, 2013 8:26 pm
by lozz
GingerMagic wrote:You haven't seen his driving! - He could probably crash when stationary.....
Idont think most 306 owners drive as they shouid,
Icarnt slate them anyway.. mines on the pile in the salvage yard :oops:

Re: universal induction filter cone type

Posted: Thu Aug 08, 2013 8:51 pm
by GingerMagic
Oh yes, damn them ebay wishbones.. :(

If anything, I have learned to avoid buying really cheap stuff from eBay and go for the Motor Factors instead...

Are you feeling better?

Re: universal induction filter cone type

Posted: Thu Aug 08, 2013 9:19 pm
by lozz
GingerMagic wrote:Oh yes, damn them ebay wishbones.. :(

If anything, I have learned to avoid buying really cheap stuff from eBay and go for the Motor Factors instead...

Are you feeling better?
A lot better thanks mate.
Still getting greif with my neck..but I can now drive again, its better than looking at 4 walls in the house.

Re: universal induction filter cone type

Posted: Thu Aug 08, 2013 10:55 pm
by tonko007
Thanks for all the input ppl can now get a filter cheers again Paul