Page 1 of 1
selecting gears
Posted: Thu May 13, 2010 10:56 pm
by Archangel
my 406 is difficult to get into gear even when stationary, 1997 1.9 diesel, any info appreciated
Re: selecting gears
Posted: Thu May 13, 2010 11:02 pm
by johnboy
Could be synro in the gearbox on its way out or a worn selector rod?
Re: selecting gears
Posted: Fri May 14, 2010 4:03 pm
by jasper5
If the gear selection is fine when the engine is off the problem is connected with the clutch, either cable problems or hydraulic problems depending on your operating system, if there appears not to be any cable or hydraulic issues, the problem probably lies with your clutch (collapsed pressure plate or broken spinner...possible bearing fault as well).
Re: selecting gears
Posted: Fri May 14, 2010 10:41 pm
by roton600
The mechanic who changed my clutch recently said that its normally the clutch plate "dragging"(worn) that makes it difficult to get in gear. Get it checked out soon, or the gear linkages will probably come off and leave you without being able to select any gears. (see one of my posts) Do you know how many miles the clutch has done? Dont use Mr Clutch for a replacemant.