406oc.co.uk

Success! been using my remote for several days now with my pioneer head unit! This is the schematic of the original joystick. Your headunit must have wired remote control input for this to work! Notice the stereo jack marked W/R on the back near the aux input! http://www.picvalley.net/u/2197/1019954...

http://www.scooter-center.com/scoweb/pa ... AT&lang=en

This is the right glue to use for the mirror. It is really solid. Been using it for them rubber seals of the front doors too.

The tip finally installed.

Look at the keypad connector. There are a whole lot of wires going to the keypad. The wires tend to tear over time. Open the connector and see if all wires are OK. Mine hadtwo torn wires that looked OK before opening the connector but made no contact on the inside.

Is the D9 handbrake button a straight swap? How exactly did you fit it?

Do something about that cabling, PLEASE

it's not exactly a 406 but i'm plannint of using it for mine.. (it's a 605) http://i303.photobucket.com/albums/nn154/dandzaman/102_6603.jpg http://i303.photobucket.com/albums/nn154/dandzaman/102_6602.jpg http://i303.photobucket.com/albums/nn154/dandzaman/102_66012.jpg http://i303.photobucket.com/alb...

My cables were wired to the indicator stalk mate(it was a '98 model). The other one we have (a '96 one) has the connector under the steering wheel but was fitted with the black facia and a blank module where the button must be. You have the cables pre layed for sure. If not under the steering wheel ...

Dont forget the springs, there are two springs that you need too.

Ah, aaaah?

A new boot trim just arrived:

And a couple of original speaker covers. They need some modifications to fit my speakers which are alot bigger than the original ones. More pics when they are in place.

The picture is ilustrative only (to know what to look for) It's not from my car, its the only pic i could find online of the 406 relay block. I did it a long time ago and i do't remember where exactly my rellay goes

That's the right rellay (yes, you need one!). And the right stalk. Dig in :) OK.... Anmother IMPORTANT!!!! thing... If your stalk is like this: http://www.picvalley.net/u/2096/21083396019579168112980209819OcpEaEDoespSGsu9HWN.JPG Then your cables go to the stalk and you need this repacement stalk in ...

Not really possible. It is possible to retrofit a climate control from a D8, but it's a pain in the a** job to do. You need to have a donor car to get the electric loom out of and all the sensors in the system along with the motors that control the air vents and the module that controls them and a b...