406oc.co.uk

Thanks for that. I have used that procedure before, the only thing I would do different to that video is when hammering the new one on I would hever hammer directly on the end of it like that. The risk is too high of the hammer hitting off center and damaging the new bushing, I would always put a pi...

I suppose warming it up with a blow torch should aid in removal?

1998 406 Break 1.8 16v The rear mounting bush on my left hand front lower control arm has worn out and is causing noise. Parts here are very expensive so I have taken to ebay for a replacement. I found this http://www.ebay.co.uk/itm/Peugeot-406-Front-Left-or-Right-Suspension-Control-Arm-Bush-With-Br...

ok so after the ongoing idle issue with my 406 I have managed to scrape together the cash to buy a Lexia3 it comes with a cd that is supposed to contain software but I don't hold much hope that it will be in any way up to date. So what is the current software that I want to use with a Lexia3 on a 19...

Those are all 2001 and newer.

Like I said before 2001 they use a different protocol

no good pre 2001 pugs have to be read by a lexia3 reader.

A standard OBDII reader will not work. (I have one and already tried it)

1998 Peugeot 406 Estate 1.8 16v 110hp Description of problem as best i can: When we start the car the revs can spike all the way up to 3000 rpm and stay there. Usually once we start driving the revs will drop back to around 1000 rpm however they do this with a delay, meaning if you pull away and let...

that's what the key off for 10 seconds, key on for 10 seconds cycle 6 times does, it resets the system.

But that being said the battery has been off for considerably more than an 11 minute stretch

When we start the car the revs can spike all the way up to 3000 rpm and stay there. Usually once we start driving the revs will drop back to around 1000 rpm however they do this with a delay, meaning if you pull away and let the car rev to around 3000 and then clutch to shift the revs will hover for...

I have a 1998 406 Estate 1.8 16v that I have been having idles issues with. I already tried changing the idle control valve and that did not solve the problem. I figured I would purchase a haynes manual to assist me with trouble shooting this problem however I have noticed that there are 2 editions ...