Search found 3569 matches
- Tue Apr 23, 2024 8:08 pm
- Forum: Bodywork (non-styling)
- Topic: need advice on wing and bonnet
- Replies: 1
- Views: 1154
Re: need advice on wing and bonnet
Your car is I believe a phase 2 model ( 2000 - 2004 ) so any saloon/estate wing from this era will fit - fuel type is inconsequential :cheesy: A 406 coupe front wing is completely different and will not fit. It's sometimes difficult to tell on online sites however if the wing has an indicator hole h...
- Sat Feb 10, 2024 1:08 pm
- Forum: Engine, Clutch and Transmission
- Topic: P0400 Code
- Replies: 10
- Views: 2203
Re: P0400 Code
So it seems your EGR is jammed, however whether this is jammed open or closed is a different story.... I'm pretty certain the rest position for the EGR is closed, and the vacuum pump/solenoid keep it closed until decelerating when the solenoid stops the vacuum so the EGR pings open No vacuum supply,...
- Fri Feb 09, 2024 9:06 pm
- Forum: Engine, Clutch and Transmission
- Topic: P0400 Code
- Replies: 10
- Views: 2203
Re: P0400 Code
It's 1628HC if I remember correctly.
Both solenoid valves have the same part number and the both kinda flutter open and closed but the ECU determines how quick each one flutters depending on demand.
Both solenoid valves have the same part number and the both kinda flutter open and closed but the ECU determines how quick each one flutters depending on demand.
- Mon Feb 05, 2024 6:01 pm
- Forum: Engine, Clutch and Transmission
- Topic: P0400 Code
- Replies: 10
- Views: 2203
Re: P0400 Code
Thing is, a 110Hdi will light up the EML if you disconnect the solenoid - whereas the Hdi90 is more forgiving.. Just check the vacuum pipes for any splits, or just replace them with some from eBay or something - might not fix it but it's worth doing as a matter of course. You can also swap the conne...
- Sat Jan 20, 2024 1:29 pm
- Forum: Electrical System and Diagnostics
- Topic: Low beam indicator blinking and turning off any other light
- Replies: 5
- Views: 941
Re: Low beam indicator blinking and turning off any other light
There is a common fault with the Comms unit - where the tiny metal ring inside the light stalk gets worn out.
If you still have one of your old Comms units you could give the repair a go
There are a few videos on YouTube if you search for Comms unit repair
If you still have one of your old Comms units you could give the repair a go
There are a few videos on YouTube if you search for Comms unit repair
- Fri Jan 19, 2024 9:23 am
- Forum: Electrical System and Diagnostics
- Topic: Low beam indicator blinking and turning off any other light
- Replies: 5
- Views: 941
Re: Low beam indicator blinking and turning off any other light
I think you can also use the Customer Options menu to mark the auto lights as absent - it's been a few years since I've dabbled with it ....
- Mon Jan 15, 2024 8:20 pm
- Forum: Electrical System and Diagnostics
- Topic: Low beam indicator blinking and turning off any other light
- Replies: 5
- Views: 941
Re: Low beam indicator blinking and turning off any other light
Have you disabled the auto lights using PP2000 too? I once enabled the DRL but it messed around with the lights, disabling auto lights fixed it. Using the button on the end of the lights stalk will turn on/off auto lights but occasionally the car would turn them back on again just to upset me so I d...
- Mon Jan 15, 2024 5:41 pm
- Forum: Electrical System and Diagnostics
- Topic: My 406 is driving me crazy, need some help
- Replies: 3
- Views: 850
Re: My 406 is driving me crazy, need some help
Try these videos.... MAF sensor cleaning https://youtu.be/fAQdQ3RJvGo?si=izwVXcp3tNYBWKxy The tiny wire inside is very fragile, so go easy with the spray cleaner Throttle sensor removal. https://youtu.be/4fYHo7voyx0?si=S_l07rH1Q8cLyy0s This is essentially just a metal spring/coil affair that gets gr...
- Mon Jan 15, 2024 5:21 pm
- Forum: Electrical System and Diagnostics
- Topic: My 406 is driving me crazy, need some help
- Replies: 3
- Views: 850
Re: My 406 is driving me crazy, need some help
Some aftermarket sensors are a bit hit and miss, some are great whereas others are inferior. If you still have the old MAF then plug that back in - the EML might not go out straight away mind. You also mentioned the oscillating revs - there is a chance your throttle sensor needs a clean - it's easy ...
- Wed Jan 03, 2024 6:28 pm
- Forum: Engine, Clutch and Transmission
- Topic: high pressure fuel pipe leak
- Replies: 5
- Views: 1289
Re: high pressure fuel pipe leak
For the record - ignore the usual 'glow plug relay' fault as it seems most Hdis do this and it's nothing to worry about.
- Wed Jan 03, 2024 1:34 pm
- Forum: General Chat
- Topic: and today i have mostly been...
- Replies: 3006
- Views: 1271627
Re: and today i have mostly been...
Well done Welters - seems like you've got your feet under the proverbial table :cheesy: Capt - sorry to hear about your boy, I hope he's doing okay? My boy was diagnosed with Coeliac a few months ago - it's taking some adjusting but we'll get there - not really a comparison though. I've still got th...
- Tue Jan 02, 2024 12:16 pm
- Forum: Engine, Clutch and Transmission
- Topic: high pressure fuel pipe leak
- Replies: 5
- Views: 1289
Re: high pressure fuel pipe leak
To be honest I've not come across this before - I've had a few 2.2hdis and never suffered from fuel/pump issues.
Again, check for unnecessary movement around the areas of the pipe ( engine and gearbox mounts? ) but other than that I can't help, sorry.
Again, check for unnecessary movement around the areas of the pipe ( engine and gearbox mounts? ) but other than that I can't help, sorry.
- Sat Dec 30, 2023 10:07 pm
- Forum: Electrical System and Diagnostics
- Topic: Changed Battery now car will not start (Immobiliser fault)
- Replies: 6
- Views: 3750
Re: Changed Battery now car will not start (Immobiliser fault)
To be honest that's actually a fair price - it's worth keeping that guy's number
Like you said, it's way cheaper than buying a new car
Like you said, it's way cheaper than buying a new car
- Sat Dec 30, 2023 5:02 pm
- Forum: Electrical System and Diagnostics
- Topic: Changed Battery now car will not start (Immobiliser fault)
- Replies: 6
- Views: 3750
Re: Changed Battery now car will not start (Immobiliser fault)
That's a good result, I hope it wasn't too costly.... Pity the dealer was less than helpful, I guess he/she needs to be cautious. So, I'm sure there is a procedure to allow the remote to work - it's something like..... Ignition on number 2, press and hold the lock button on the remote for 10 seconds...
- Fri Dec 29, 2023 11:57 am
- Forum: Electrical System and Diagnostics
- Topic: Cylinder reference sensor
- Replies: 4
- Views: 996
Re: Cylinder reference sensor
Hi Guy, sorry I've been away for a couple of days. I was going to suggest you join the Coupe forum as many people there own the 2.2 petrol ( it's rare in a normal 406 ) however I see you already have :cheesy: Frog is a very knowledgeable chap, good with his wiring diagrams too - I hope you find a re...