406oc.co.uk

Can anyone tell me which pipe goes where on the boost controller connected to the ecu? It has 3 inlets ,pipe goes from inlet to this then from it to turbo. I found it hanging with nothing connected. I think it was by passed by previous owner how would this of been done? surly car would not run if it...

Hi,

These are the readings you should get from the sensor dependant on the temperature:

10degrees C-3530-4100ohms
20degrees C-2350-2670ohms
30degrees C-1585-1790ohms
90degrees C-215-245ohms

Nothing for other problem sorry

Hi

Did you get my pm?
This is where i got my info for car its really good and got auto data free with it .

http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... K:MEWNX:IT

its a bit of a mare searching as it provides loads of info but it helped me

Arrgh

I cant copy and paste the tables on autodata.
PM me an address and i will try and burn a copy to disk for you.

I had so many things go tits up before i got it running ok Ish

i would'nt take anything apart or buy anything else till you 100% check what you already have.

Hi mate, I have the same ish setup as you and had similar problems on the way. I ended up with a 200sx fuelpump running from the battery with ecu as a switch via a relay and after market FPR running3.5bar. Standard 406 ecu (flashed)disconected turbo boost regulator that goes to ecu. 1 bar boost and ...

lack of fuel.

i goofed numbers are:
p021
p025
p026

Mine was fuel pump.

Have you turned up the boost or changed your normal fuel garage?(Tesco petrol is terrible )

Could be simple like fuel filter,plugs,leads try that first then check pump .

As above for a 406 sri turbo petrol but im sure a few other might fit?

Anyone got one cheap?

posted to hereford

thanks

Ok followed wires a bit further and found the following numbers
205p
206p
201p

Can somebody tell me what the wires are for please?

Yeah, i thought that too but could not find any numbers. She is off the road till next track day in june ,tbh got lots to tweek all on a pikey budget . 200sx fuelpump and turbo(from a mate) +++ boost and another fan ,bigger intercooler from an evo ,i also need to drop the seats down as im fed up of ...

Thanks,

It's staying in the bin

Ballast as in extra weight?

Itsin the bin,i dont have aircon. Fans run from temp switch on radiator think this was to do with tempgauge and ecu eitherway its no longer connected.

Yes it looks like a mini pipebomb lol.

Hi anybody?

I think its a ecu temp thingy.

the plug has been removed ,ihave 2 white and 1 brown/red wire what goes where

? its covered in tape glue rust ect , tempgauge not working either ?

I didnt realy say hi so hi.

Pics of my project car:
i also have a very dirty old 406 estate