406oc.co.uk

Not that I can see...

The garage said that the next step is to take the head off....

Do you agree?

Ok, the car has been to Peugeot today, Fault codes are, Permanent Fault. 3rd piston deactivation. Short-circuit to earth or circuit open. P1135. Intermittent Fault. Crankshaft-camshaft synchronisation. variation in engine speed signal too sudden. P0340 Intermittent Fault. Crankshaft -camshaft sychro...

Thanks again,

Ok, after it ran I ajusted the tension on the Cam belt as it was a little tight, re-attached the auxillery belt and put wheel arch and wheel back on.....

Thanks once again for taking the time to read this, The reason I changed the water pump, was we where loosing a lot of water, with no evidence of it being the head gasket, I read on the internet that a couple of other people had had this and it turned out to be the water pump. (thought it was worth ...

the Ecu was never removed and we have fuel pressure from the low pressure pump.

Its a 2001 90Bhp model.

I am proper stumped.....

Don't know anyone with a code reader. Local Pug garage want £75 just to plug it in!!!

I have triple checked the timing and am 100% that its in the right place.

Does anyone know if the camshaft position sensor would cause this?

Peter

Thanks again,

Not stuggling to turn over, easy start made no change. Sounds like it really wants to go.....

Peter

I agree,

I have spent all day on this, checked the timing more than once, I have had another person check too. The cam and crank tdc hole's are aligned at the same time?!

Peter

Thanks,

It ran for minutes after the water pump change, my first thoughts where the timing so I have checked the timing and it seems to be fine.....

Peter

Ok, 406 2.0l HDI Was losing water having read forums we worked out that it might be the water pump, brought a new one and fitted it, engine ran briefly after this. Then put the rest of the car back together, and it hasn't ran since, it turns over fires once but then just turns on the starter?!? The ...

Please help,

We have a P0341 fault code and are trying to reset? Is it possible to do it myself?

Susan