406oc.co.uk

to plod .. if your pug has bsi it's much simpler than our old D8 .. wich don't have. Just have to put two wires 1368 from ECU to BSI pin9 and another one from bsi pin 1 to ground wich is the button . The connector on the bsi should be brown 12 wires / as it states in here :arrowd: . After you have d...

to plod .. if your pug has bsi it's much simpler than our old D8 .. wich don't have. Just have to put two wires 1368 from ECU to BSI pin9 and another one from bsi pin 1 to ground wich is the button . The connector on the bsi should be brown 12 wires / as it states in here :arrowd: . After you have d...

- found the 1368 lead on a brown connector under the wheel - not connected just stops there. - on my ECU is on pin 32 - who has autodata can see all models i d'ont recall the number of the pin .. but iven if i tell you the number of the pin i cannot gurantee it s the same, the color is violet thoug...

- found the 1368 lead on a brown connector under the wheel - not connected just stops there. - on my ECU is on pin 32 - who has autodata can see all models i d'ont recall the number of the pin .. but iven if i tell you the number of the pin i cannot gurantee it s the same, the color is violet thoug...

solved the erratic idling - was a bad grounding. The last mecanic forgot to tighten the screws that holds the ground - minus - (-) to the engine case. After tightening everything works like a charm. :idea: :arrow: So remember to verify grounding. :arrowl: Update : Done another diagnostic .. no erro...

Thanx mjb for the quick response, i did everything like there, cut the wire i did everything like in the pictures posted by maxxymilian - http://img85.imageshack.us/gal.php?g=dsc05983r.jpg except the 1368 wire wich i soldered on pin pin 12 B15 (wich is not displayed in those pics) .. by the way is t...

Thanx mjb for the quick response, i did everything like there, cut the wire i did everything like in the pictures posted by maxxymilian - http://img85.imageshack.us/gal.php?g=dsc05983r.jpg except the 1368 wire wich i soldered on pin pin 12 B15 (wich is not displayed in those pics) .. by the way is t...

Hi .. got a 406 2L Turbo xu10j2te 98model, same problems irregular idle which causes the motor to stall, not always though. I've tested almost every sensor on the car by the book measurements with the multimeter. (dont have an osciloscope yet very useful if i had one) . Tested - ICS - idle air contr...

hi guys .. i have a 2L turbo brgx xu10j2te or xu10j2cte very confusing. Is this mod possible for my 406 pug .. i have Motronic MP 3.2 ECU ???. I already started the mod a few days back .. just from curiosity coz i bought the service manual from france and now i see that some of you have already done...

hi guys .. i have a 2L turbo brgx xu10j2te or xu10j2cte very confusing. Is this mod possible for my 406 pug .. i have Motronic MP 3.2 ECU ???. I already started the mod a few days back .. just from curiosity coz i bought the service manual from france and now i see that some of you have already done...