406oc.co.uk

Hi Thank you for the reply .The bottom engine mount is ok as it was replaced quite recently .Also the hose is well clear of any brackets .The pipe went when i was on the motorway and oil mist had spread under the car which is why i was suspecting that the turbo oil seals maybe worn as engine oil wil...

Hi My bottom intercooler pipe blew the other day .I have read from other post that this seems to be common welly seems to have had one blow as well there was quite alot of oil in the intercooler pipe which i understand is common .Does anyone know where i can buy a turbo from or has anyone got on for...

Hi Does anyone know where i can purchase two front brake caliper carriers for a Peugeot 406 2.0 hdi .The brakes are Lucas and the holes where the guide pins go are worn resulting in the caliper sitting at a slight angle.I have tried new pins and is still the same.I have enquired at Peugeot Dealer bu...

Thank you for the advice going to tackle it this weekend should be fun

This topic appears on here quite a lot .Can anyone tell me if it possible to remove the gearbox out of a peugeot 406 2.0 hdi 110 without dropping the subframe totally down .Is there an easier way of doing it as it looks quite tight for room
Thankyou

:) Hi welly thanks for the reply.I have checked the fuse and wiring you have marked and they are all ok .I would have thought regardless if aircon is on or not if the engine got hot enough it would work like you say that aside the ecu must have thought it was too hot for the warning to appear on the...

Hi I have got a 1999 406 2.0l hdi 110.I was in traffic yesterday on the motorway which was stop start for over an hour :evil: .While i was in traffic a warning came on the mfd "engine temp too high".I stopped and looked around engine checking for leaks, etc non visible .I have never had this warning...

Hi I have got a D8 Handbook if your interested it seems to cover the saloon and estate models

Hi i got a new cv joint with abs ring included for about £35 off ebay and was of good quality

Hi It is an engine breather if it was me i would take the rubber tube off where the breather goes in as it looks like it is blocked and give it a good clean out also it looks like a piece has broken off the bottom of the breather most probably still in the pipe

Hi what iam trying to say is that is it possible to enable a trip function in the bsi on my car a 1999 406 2.0 hdi.The wiring plug that goes to the wiper switch has got a wire missing which i have discovered goes to the trip switch on the end of the wiper stalk so it is obviously needed for somethin...

I have been looking at various posts and this subject has been around for quite a while so apologize for asking.I have got a 406 2.0 hdi 110 and was looking to enable trip function.I have got a wiper switch with trip function on the end my car appears to have a terminal missing in the wiper plug if ...

Thank you for the warm welcome

I have been looking on this site for a while and decided to join and have a chat with the rest of you .I run a 1999 406 2.0 hdi 110 estate