406oc.co.uk

Today i washed, cleaned and painted the front calipers from HDI 110 that came earlier this week. http://www.picvalley.net/u/2322/702564194174599559713698461714mmEeqXtq6VnJWH99pJT.JPG Also managed to install the 607 interior which was a pain in the a**. Took me a week to sort the fixing issues and th...

The splitter is from a renault laguna 1. The lowering springs are painted red and waiting their turn. Actually i am looking for a set of steel 15" or 16"s for the winter because with the lowering i'll be fitting a set of 2.0 16v 283mm front brakes. I can't manage to get my hands on a cheap v6 brembo...

I use a lighter for the heat shrink tube why bother with anything electrical at all?

It's made using bumper strip pieces and stickig them together to make one big strip. Then it's primer, paint and voila
p.s. the bumper will need some modding too for the whole thing to look tight.

Yes, i had to bend it a little it needed 5 mm for the bonnet to clese properly. The left and the right side curves were different. Only the left side needed some bending. The 407 key is working fine for months now. I''m using the alarm system to lock/unlock the car so i didn'thad to move the chip in...

Looks better in person, the paint is ideal, so it does not need any sand blasting. I might settle for black too. Red will be too contrasting. Those white marks are from the postage tape.

Legaly i don't have a problem. They are almost ready. There is a strutt brace from a 3.0 coupe coming my way right now. It will be modified a bit, sand blasted, powder coated red and i made a little OMP sticker for it although its not genuine OMP... It'salmost time to start dealing with the egine ba...

A pic in the middle of taillight modding. This will be a set of unique tails as far as i know.

A new gearcnob from a 2003 Saxo. Fitting it was a real pain in the ass because it was very different. http://www.picvalley.net/u/1575/96862649611120595881347545715ceCoOtVjApnnQtxc67w4.JPG http://www.picvalley.net/u/2696/178121541081651244313475457190n8r6sqNn4ofD7EYQckt.JPG http://www.picvalley.net/u...

Problem solved. I soldered a NON POLARIZED capacitor 30 uF (32 measured with the multimeter) on the cable going to the mid section (right after the connector on the "+" line ) like this: http://www.davecompton.com/CarAudio/1HiPass.gif This should be equal to around 1200 Hz cutoff frequency. It worke...

No, the amp isn't really something special and would be a downgrade to my system. The speakers on the other hand are very nice and the difference between them and the oem tweeters on the saloon is audible right away. Today i tried them using the built in High pass filter of the Pioneer and they work...

Hi is there any progress mith those mids? I have a set of JBL ones too and i'll be fitting them at the end of the week.