sill rubber door seals?

Discuss the 406's Bodywork stuff in here (what parts fit what, what can be interchanged with what etc etc).

Moderator: Moderators

Post Reply
johntl
2.0 16v
Posts: 116
Joined: Fri Sep 24, 2010 7:38 pm
Location: cleveland , england

sill rubber door seals?

Post by johntl » Sat Jul 12, 2014 6:01 pm

Ive got a 4 door 406 with usual sill rubber problem , my question is where is the cheapest place to bu the rubbers??

User avatar
GingerMagic
3.0 24v
Posts: 3043
Joined: Fri Apr 06, 2012 9:02 pm
Location: Bournemouth

Re: sill rubber door seals?

Post by GingerMagic » Sun Jul 13, 2014 8:49 pm

Hi, I got new rubbers recently.

After trawling through eBay I only found one or two and they were £25 + postage, second hand ones are hard to come by.

I eventually went to Peugeot directly, and got them for the same price but without the postage as I picked them up.

Part numbers are;
9023 LJ for the left,
9023 LK for the right.

You will also need some clips, they are only a few pence each ( 6 come with each strip but you need 19 per side in total )
6997 86 is the part number.

Hope this helps....

Kelv.
1999 T4 family wagon
2005 Vauxhall Meriva
1998 406 V6 Coupe - Midlife crisis..!
PP2000 user, can help with faults / diagnostics in the Bournemouth area.

johntl
2.0 16v
Posts: 116
Joined: Fri Sep 24, 2010 7:38 pm
Location: cleveland , england

Re: sill rubber door seals?

Post by johntl » Mon Jul 14, 2014 7:47 pm

Thanks for the info , cheers :)

User avatar
RichieD
Newbie
Posts: 9
Joined: Fri Jul 11, 2014 9:56 pm
Location: Fleetwood, Blackpool, Lancashire
Contact:

Re: sill rubber door seals?

Post by RichieD » Tue Jul 15, 2014 11:11 pm

This is great info and should be stickied was looking for the part numbers as my new estates rubbers are knackered.
Richie Dawson
R.D. Automotive
Web:https://www.facebook.com/rdautofy7

lisboa
1.6 8v
Posts: 10
Joined: Sun Jul 15, 2018 8:14 am

Re: sill rubber door seals?

Post by lisboa » Mon Sep 03, 2018 2:44 pm

hello

I need to replace the sill rubbers on my 2002 2.0 HDI 406 estate but I only see references to the parts 9023 LJ and 9023 LK - are these parts the same for both saloon and estate?

Thanks

User avatar
GingerMagic
3.0 24v
Posts: 3043
Joined: Fri Apr 06, 2012 9:02 pm
Location: Bournemouth

Re: sill rubber door seals?

Post by GingerMagic » Mon Sep 03, 2018 3:30 pm

Yes, the parts are the same for both saloon or estate.
I've only owned estate cars anyway - until I bought the Coupé :cheesy:
1999 T4 family wagon
2005 Vauxhall Meriva
1998 406 V6 Coupe - Midlife crisis..!
PP2000 user, can help with faults / diagnostics in the Bournemouth area.

PeterN
3.0 24v
Posts: 1418
Joined: Sun Mar 04, 2012 7:04 pm
Location: Charmouth, Dorset

Re: sill rubber door seals?

Post by PeterN » Tue Sep 04, 2018 11:03 am

If they are still in one piece you can stick them on with spray on contact adhesive, you need to thoroughly clean the metal surface first, I use meths, not me personally you understand . :?

Peter

lisboa
1.6 8v
Posts: 10
Joined: Sun Jul 15, 2018 8:14 am

Re: sill rubber door seals?

Post by lisboa » Tue Sep 04, 2018 12:52 pm

Thanks for the responses (especially for the meth tip).

They are still in one piece but look the worse for wear (possibly even stretched) so I should probably get a new set. I also have a less than perfect seal at the top of the front passenger door (makes a whistling sound at speed) - initially I thought the door must be misaligned or bent but now i wonder if it's just that the rubber has perished and i need a new set there too.

Thanks again.

beko1987
1.6 8v
Posts: 12
Joined: Sat Oct 27, 2018 7:05 pm

Re: sill rubber door seals?

Post by beko1987 » Tue Oct 30, 2018 7:51 pm

Aha, the thread I need! My drivers one is scrap! Time to see if the part still exists from peugeot in 2018!

Post Reply