Getting rid of dents

Discuss the 406's Bodywork stuff in here (what parts fit what, what can be interchanged with what etc etc).

Moderator: Moderators

Captain Jack
3.0 24v
Posts: 3809
Joined: Sun Aug 07, 2005 11:26 am
Location: Langford, Somerset

Getting rid of dents

Post by Captain Jack »

Hello,

I have a couple* of car park related dings with people slamming their doors into mine etc. Most are small dents with unbroken paint - is there a way to remove these without calling out Dent Masters (or someone of similar ilk) who charge the earth? I see a lot of dent pulling 'kits' on fleaBay - mostly seem to use glue to grab and pull. Not sure it's up for this job...

I guess I could remove the door card (which is a pain in itself) and push it from the other side.

Any thoughts/ideas/experiences?
Image
2003 - 2008: 1998 Peugeot 406 2.1 TD 110bhp LX Saloon
2008 - 2009: 2004 Honda Accord 2.2 CDTI 136bhp Executive Saloon
2009 - 2013: 2002 Peugeot 406 2.0 HDI 110bhp Executive Saloon
2013 - ????: 2007 Peugeot 407 2.2 HDI 170bhp Executive Saloon (mapped to 213bhp :twisted:)

steve_earwig
Moderator
Posts: 19455
Joined: Thu Oct 04, 2007 6:09 pm
Location: Jastrebarsko, Croatia http://www.jastrebarsko.hr/lokacija/

Re: Getting rid of dents

Post by steve_earwig »

Wot? Nobody? :shock: My experience is not many dents are going to go >boink< and disappear if you push them from the inside, the dent actually stretches the metal around it, so then you have to loose this, erm, somehow :?
Unskilled meddling sin©e 2007

2004 D9 2.0 HDi 110 Estate lhd VF38ERHZF81657352 - sold but being very well looked after.
1991 Yamaha TDM850 - pretending to be 425cc single :frown:
2008 Toyota Recall4 2.0 VVTI ATM LHD JTMBH31V90D007261 - flimsy piece of crap.
1953 Matchless G3LS - It's alive!!

Captain Jack
3.0 24v
Posts: 3809
Joined: Sun Aug 07, 2005 11:26 am
Location: Langford, Somerset

Re: Getting rid of dents

Post by Captain Jack »

ho hum.... Tricky.
Image
2003 - 2008: 1998 Peugeot 406 2.1 TD 110bhp LX Saloon
2008 - 2009: 2004 Honda Accord 2.2 CDTI 136bhp Executive Saloon
2009 - 2013: 2002 Peugeot 406 2.0 HDI 110bhp Executive Saloon
2013 - ????: 2007 Peugeot 407 2.2 HDI 170bhp Executive Saloon (mapped to 213bhp :twisted:)

dirtydirtydiesel
3.0 24v
Posts: 1409
Joined: Sun Apr 28, 2013 11:02 pm
Location: Coalville, Leics.

Re: Getting rid of dents

Post by dirtydirtydiesel »

Dent master don't charge the earth Captain,
There actually very reasonable & to watch them at work is fascinating :)
2002 110 HDi estate, Rapier in monaco blue! ( found quite a bit more power :cheesy: ) for sale
1999 3.0 V6 SE coupe in Diablo Red ( my baby ) sold
2006 206 1.4 16v sport in Aegean blue ( wife's shopping trolley :roll: )

2006 BMW e61 535d m-sport :supafrisk: run's for cover :lol:

lozz
3.0 24v
Posts: 11910
Joined: Thu Oct 07, 2010 10:18 pm
Location: where-ever

Re: Getting rid of dents

Post by lozz »

Hi.

The dent kits are OK on minor dents
I've used them in the past with good results..
Best used on a warm day..

Captain Jack
3.0 24v
Posts: 3809
Joined: Sun Aug 07, 2005 11:26 am
Location: Langford, Somerset

Re: Getting rid of dents

Post by Captain Jack »

Had DingMaster out today - did all the little bumps (and one big one that I didn't see!) for £100. Amazing job - can't even see they were there.
Image
2003 - 2008: 1998 Peugeot 406 2.1 TD 110bhp LX Saloon
2008 - 2009: 2004 Honda Accord 2.2 CDTI 136bhp Executive Saloon
2009 - 2013: 2002 Peugeot 406 2.0 HDI 110bhp Executive Saloon
2013 - ????: 2007 Peugeot 407 2.2 HDI 170bhp Executive Saloon (mapped to 213bhp :twisted:)

dirtydirtydiesel
3.0 24v
Posts: 1409
Joined: Sun Apr 28, 2013 11:02 pm
Location: Coalville, Leics.

Re: Getting rid of dents

Post by dirtydirtydiesel »

Told you they're good :cheesy:
Glad you're pleased with the results 8)
2002 110 HDi estate, Rapier in monaco blue! ( found quite a bit more power :cheesy: ) for sale
1999 3.0 V6 SE coupe in Diablo Red ( my baby ) sold
2006 206 1.4 16v sport in Aegean blue ( wife's shopping trolley :roll: )

2006 BMW e61 535d m-sport :supafrisk: run's for cover :lol:

Welly
The moderator formally known as Welton
Posts: 14941
Joined: Tue Jan 10, 2006 12:52 pm
Location: East Midlandfordshire

Re: Getting rid of dents

Post by Welly »

Imagine if you had a pin-straight dent-free Volvo for example and I dunno, owned it for 7 years and err kept it out of everyone's way in car parks.

Then imagine a Citroen C4 parked next to it on your driveway. C4 doors open WIDE and the last part of the mechanism flings the door open with gusto.

Just think what could* happen if the C4 door hit the Volvo door and put a vertical crease-dent in it :roll:

Oh and Cap'n you get 1/10 for now before/after pics :(
Cars in my care:

2005 Volvo S40 T5 German Diesel botherer with new tyre grippage
2010 Citroen C4 1.6 HDi turbo de' explosions, bizarre gearbox model
2010 Renner Twingo refreshingly simple

steve_earwig
Moderator
Posts: 19455
Joined: Thu Oct 04, 2007 6:09 pm
Location: Jastrebarsko, Croatia http://www.jastrebarsko.hr/lokacija/

Re: Getting rid of dents

Post by steve_earwig »

Why, I'd teach said Citroen a lesson with a big hammer :twisted:

YoyoII still has the dent in the rear quarter it came with, I did want to sort it out but it's gained a load more in the year we've been infested by it, so I reckon they're no point as I'll just get more annoyed by any further damage.

Conclusion: it's a mug's game trying to keep something nice as nobody else gives a sh*t :frown:
Unskilled meddling sin©e 2007

2004 D9 2.0 HDi 110 Estate lhd VF38ERHZF81657352 - sold but being very well looked after.
1991 Yamaha TDM850 - pretending to be 425cc single :frown:
2008 Toyota Recall4 2.0 VVTI ATM LHD JTMBH31V90D007261 - flimsy piece of crap.
1953 Matchless G3LS - It's alive!!

Captain Jack
3.0 24v
Posts: 3809
Joined: Sun Aug 07, 2005 11:26 am
Location: Langford, Somerset

Re: Getting rid of dents

Post by Captain Jack »

To be honest, it was a few dings which most people would have ignored. I also have a few scratches from the neighbouring (swimbo's) car that likes to rest its door against mine when one gets in and out of it.

On Monday I am getting a full valet for it including machine polish/paint correction. Will post pics then!
Image
2003 - 2008: 1998 Peugeot 406 2.1 TD 110bhp LX Saloon
2008 - 2009: 2004 Honda Accord 2.2 CDTI 136bhp Executive Saloon
2009 - 2013: 2002 Peugeot 406 2.0 HDI 110bhp Executive Saloon
2013 - ????: 2007 Peugeot 407 2.2 HDI 170bhp Executive Saloon (mapped to 213bhp :twisted:)

Welly
The moderator formally known as Welton
Posts: 14941
Joined: Tue Jan 10, 2006 12:52 pm
Location: East Midlandfordshire

Re: Getting rid of dents

Post by Welly »

I asked the bodywork place next door at work how much it would be for a Machine Polish on my car........

Prices "start" at £250.00 :shock:

I'd like to buy the kit and have a go, WCPGW? :o
Cars in my care:

2005 Volvo S40 T5 German Diesel botherer with new tyre grippage
2010 Citroen C4 1.6 HDi turbo de' explosions, bizarre gearbox model
2010 Renner Twingo refreshingly simple

Captain Jack
3.0 24v
Posts: 3809
Joined: Sun Aug 07, 2005 11:26 am
Location: Langford, Somerset

Re: Getting rid of dents

Post by Captain Jack »

I was quoted £120 for machine polish + another £140 for the full valet, so comparable. The work is going on now!

Image
Image
2003 - 2008: 1998 Peugeot 406 2.1 TD 110bhp LX Saloon
2008 - 2009: 2004 Honda Accord 2.2 CDTI 136bhp Executive Saloon
2009 - 2013: 2002 Peugeot 406 2.0 HDI 110bhp Executive Saloon
2013 - ????: 2007 Peugeot 407 2.2 HDI 170bhp Executive Saloon (mapped to 213bhp :twisted:)

steve_earwig
Moderator
Posts: 19455
Joined: Thu Oct 04, 2007 6:09 pm
Location: Jastrebarsko, Croatia http://www.jastrebarsko.hr/lokacija/

Re: Getting rid of dents

Post by steve_earwig »

I suspect I'd be going over it afterwards with a magnifying glass...
Welly wrote:I asked the bodywork place next door at work how much it would be for a Machine Polish on my car........

Prices "start" at £250.00 :shock:

I'd like to buy the kit and have a go, WCPGW? :o
Image
:supafrisk:

I machine polished the Senator (at work :supafrisk: ) as the paint was very dull, it came up rather well. But then it wouldn't have been much of a disaster if I'd made a mess of it on a 250 quid car...
Unskilled meddling sin©e 2007

2004 D9 2.0 HDi 110 Estate lhd VF38ERHZF81657352 - sold but being very well looked after.
1991 Yamaha TDM850 - pretending to be 425cc single :frown:
2008 Toyota Recall4 2.0 VVTI ATM LHD JTMBH31V90D007261 - flimsy piece of crap.
1953 Matchless G3LS - It's alive!!

Welly
The moderator formally known as Welton
Posts: 14941
Joined: Tue Jan 10, 2006 12:52 pm
Location: East Midlandfordshire

Re: Getting rid of dents

Post by Welly »

Cap'n you'll need to study proper washing techniques after the MP session as you can easily 'swirl' the clear coat again after a few washes. I guess you know this and that's why you want it done for a fresh start.

Snow foam, two-buckets, grit guard, lambs wool wash mitt, MF towels etc etc ....
Cars in my care:

2005 Volvo S40 T5 German Diesel botherer with new tyre grippage
2010 Citroen C4 1.6 HDi turbo de' explosions, bizarre gearbox model
2010 Renner Twingo refreshingly simple

Captain Jack
3.0 24v
Posts: 3809
Joined: Sun Aug 07, 2005 11:26 am
Location: Langford, Somerset

Re: Getting rid of dents

Post by Captain Jack »

I can't remember the last time I washed my car....

Rain stopped play today and he's just about managed to finish MP. He's coming back tomorrow to stick some wax on - apparently it will provide 3-4 months protection.
Image
2003 - 2008: 1998 Peugeot 406 2.1 TD 110bhp LX Saloon
2008 - 2009: 2004 Honda Accord 2.2 CDTI 136bhp Executive Saloon
2009 - 2013: 2002 Peugeot 406 2.0 HDI 110bhp Executive Saloon
2013 - ????: 2007 Peugeot 407 2.2 HDI 170bhp Executive Saloon (mapped to 213bhp :twisted:)

Post Reply