Oh Bugger! (Suspect handbrake shoe lining loose)

Shocks, springs, anything to do with the running gear

Moderator: Moderators

User avatar
Doggy
Mod with a 2.2 HDi, De-Fapped!
Posts: 10005
Joined: Mon Oct 13, 2008 11:49 pm
Location: Northants

Re: Oh Bugger! (Suspect handbrake shoe lining loose)

Post by Doggy » Mon Jan 25, 2016 1:48 pm

I seem to remember that too.
I guess a long M3.5 or M4 setscrew could be locked in place - washer either side of back plate / nut to clamp it in place and another washer / nyloc to hold the shoe on would work, but guess how much of that I had to hand on Saturday?
I'll be ready next time. :roll:
2003 HDi 2.2 6-speed Exec Estate

User avatar
Welly
The moderator formally known as Welton
Posts: 14581
Joined: Tue Jan 10, 2006 1:52 pm
Location: East Midlandfordshire

Re: Oh Bugger! (Suspect handbrake shoe lining loose)

Post by Welly » Mon Jan 25, 2016 2:26 pm

Screwfix be your friend, order online and have them washers and bits delivered ready.

It's amazing how many times you will find use for washers once you have some around. Must order some more myself thinking about it; all mine get used for fixing furniture, lawnmowers, french automobiles........
Cars in my care:

2005 Volvo S40 T5 a bit pampered
2010 Citroen C4 1.6 HDi turbo de' explosions
2010 Renner Twingo refreshingly simple

jasper5
3.0 24v
Posts: 3653
Joined: Fri Nov 28, 2008 2:30 pm

Re: Oh Bugger! (Suspect handbrake shoe lining loose)

Post by jasper5 » Mon Jan 25, 2016 8:22 pm

A simple repair for the pulling through of the holding springs/pins is to get a longer set of pins with longer springs and reverse one of the holding washers, push the pin through it then fit the whole thing through a penny washer...this gives you the area the size of an old penny covering the hole...then slot the whole lot through the backplate and fasten to the shoe using a spring and fastening washer.

Post Reply