Power steering issue

Shocks, springs, anything to do with the running gear

Moderator: Moderators

Post Reply
bilsten
Newbie
Posts: 1
Joined: Tue Feb 18, 2014 10:15 am

Power steering issue

Post by bilsten » Tue Feb 18, 2014 10:20 am

Hi all,

I have a problem with the speed sensitive power steering on my 406 v6 from 2000 (235 000 km).
The loss of power steering was gradual, and especially noticeable at low speed when trying to park. I am not sure, but the power steering seems to improve after 15-20 min of driving - and the fluid reservouir is filled.

I have tried to turn the wheel to full stop and listened after the power steering motor bypass, but it does not come with a high characteristic sound as on my friends v6 from '99. There seems to be a sound but it is high pitched low volume squeal.

There is no warning lights in the dashboard, but the car also appears to be leaking engine coolant, even though I think that the problem is not necessarily related.

I suspect that the power steering motor is defect, but perhaps you have some other thoughts or ways of troubleshooting the issue :?:

User avatar
midsmike
3.0 24v
Posts: 671
Joined: Thu Nov 17, 2011 2:56 pm
Location: birmingham

Re: Power steering issue

Post by midsmike » Thu Mar 20, 2014 2:40 pm

Did you sort the problem out
1998 peugeot 406 2.1 td executive saloon silver,d9 mods 18" dare v2 alloys In Phase XTC 6.5″ 240W Component Speakers up front and Vibe Slick 6x9 Three Way Speakers - Slick 693 in the rear runing off a Alpine MRV-F307 V12 Series amp and a vibe cbr 12 twin evo sub in the boot. 1998 peugeot 406 2.1 td lx saloon red

8Jb9
2.0 16v
Posts: 127
Joined: Wed Apr 25, 2012 5:48 pm

Re: Power steering issue

Post by 8Jb9 » Thu Mar 20, 2014 5:47 pm

No, he hasn't sorted it out yet.

PP2000 shows no faults. The plan is to hook up a pump from a donor-car and see if it works. An alternative could be to run a pressure test, but the equipment is not available to us (note - 100bar!):
http://www.peugeot206cc.co.uk/repair-20 ... ed0ck3.htm

User avatar
mjb
Site Admin
Posts: 7961
Joined: Wed May 31, 2006 9:06 pm
Location: Stoke

Re: Power steering issue

Post by mjb » Fri Mar 21, 2014 12:38 pm

Check the crankshaft pulley hasn't separated - it's two bits with a bit of rubber separating them. The rubber can disintegrate causing the pulley to slip on itself. Simple check is to paint a line across it, from centre to edge and see if it's still just one line the next day
<steve_earwig> I think this forum is more about keeping our cars going with minimal outlay than giving our cars more reason to go bang

8Jb9
2.0 16v
Posts: 127
Joined: Wed Apr 25, 2012 5:48 pm

Re: Power steering issue

Post by 8Jb9 » Fri Apr 22, 2016 5:51 pm

This is a very old post, but for the sake of anyone else having the same problem:

The variable valve on the power steering rack did not work any longer. The solenoid resistance was out of spec (open circuit, I believe). Replaced the little valve with one from Ade, and all was well.

NinoB
1.8 16v
Posts: 65
Joined: Tue Jul 22, 2014 10:39 am

Re: Power steering issue

Post by NinoB » Thu Jun 16, 2016 8:02 am

Hello, I dunno if anyone can help me, my steering wheel is too extra soft and too sensitive, if am travelling it will become worse, please what is the problem? What can I do?

8Jb9
2.0 16v
Posts: 127
Joined: Wed Apr 25, 2012 5:48 pm

Re: Power steering issue

Post by 8Jb9 » Wed Jun 22, 2016 10:25 pm

Hi Nino.

We need some more information.

1) Which model (engine, etc) do you have?
2) What do you mean by too sensitive? Is there any play in it?
3) Is it something that suddenly appeared?

User avatar
steve_earwig
Moderator
Posts: 18743
Joined: Thu Oct 04, 2007 6:09 pm
Location: Jastrebarsko, Croatia http://www.jastrebarsko.hr/lokacija/

Re: Power steering issue

Post by steve_earwig » Thu Jun 23, 2016 7:08 am

Sounds like another variable steering gone too light. How did you diagnose yours?
Talking bollocks sin©e 2007

2004 D9 2.0 HDi 110 Estate lhd VF38ERHZF81657352 - sold but being very well looked after.
1991 Yamaha TDM850 - fuel leaks galore!
2008 Toyota Recall4 2.0 VVTI ATM LHD JTMBH31V90D007261 - flimsy piece of crap.
1953 Matchless G3LS - Can somebody stand by with an extinguisher?

8Jb9
2.0 16v
Posts: 127
Joined: Wed Apr 25, 2012 5:48 pm

Re: Power steering issue

Post by 8Jb9 » Fri Jun 24, 2016 8:15 am

In our case it went heavy, although you're right. I suspect a friend's variable has failed light (doesn't feel right).

In this particular case I measured across the solenoid and found that it was an open circuit, I believe.

If the variable power steering fails in sort of has to be one of two things:
-The solenoid can't move
-It can move, but it's not getting the right signal

I seem to recall that I saw a graph of applied voltage vs speed at some point - could be worth looking at for our unfortunate gentleman?

Post Reply