automatic rad.

We tell you what we're doing, you tell us what we're doing good or bad.

Moderator: Moderators

automatic rad.

Postby paulhick » Fri Mar 02, 2012 9:32 pm

i have a p reg 406 rad. has developped a leak trying to take rad.out but can't get bottom hose off. if i cut hose off would i be able to put a larger hose over the pipes & fasten with jubilee clips
paulhick
Newbie
 
Posts: 2
Joined: Fri Mar 02, 2012 9:14 pm

Re: automatic rad.

Postby midsmike » Fri Mar 02, 2012 11:22 pm

what engine is in it
1998 peugeot 406 2.1 td executive saloon silver,d9 mods 18" dare v2 alloys In Phase XTC 6.5″ 240W Component Speakers up front and Vibe Slick 6x9 Three Way Speakers - Slick 693 in the rear runing off a Alpine MRV-F307 V12 Series amp and a vibe cbr 12 twin evo sub in the boot. 1998 peugeot 406 2.1 td lx saloon red
User avatar
midsmike
3.0 24v
 
Posts: 671
Joined: Thu Nov 17, 2011 2:56 pm
Location: birmingham

Re: automatic rad.

Postby omega » Fri Mar 02, 2012 11:44 pm

if you cant remove the hose you can cut then insert a smaller diamter metal pipe and clamp it with jublee clips,this is the better way.
omega
3.0 24v
 
Posts: 1745
Joined: Wed Dec 31, 2008 1:25 am
Location: nottingham

Re: automatic rad.

Postby paulhick » Sat Mar 03, 2012 12:27 pm

thanks for advice engine is a 2ltr automatic p reg can't budge the bottom hose from inside of rad. or the other end soaked it with wd40 but having no effect
paulhick
Newbie
 
Posts: 2
Joined: Fri Mar 02, 2012 9:14 pm


Return to Website News and Feedback

Who is online

Users browsing this forum: No registered users and 1 guest