Hard to start

Discuss, ask, or get help with engine and mechanical queries in here.

Moderator: Moderators

3.0 24v
Posts: 1466
Joined: Sun Mar 04, 2012 7:04 pm
Location: Charmouth, Dorset

Re: Hard to start

Post by PeterN » Thu Mar 08, 2018 11:28 am

Now I have seen the engine, yes, glow plugs are the likely culprit. 25 amps is not enough for 4 glow plugs, 60 amps would be nearer the mark. You need to disconnect each plug and either check the current flowing or measure the resistance, they should be somewhere around 1 ohm, much higher or completely open circuit and there is your problem.


User avatar
Mod with a 2.2 HDi, De-Fapped!
Posts: 10108
Joined: Mon Oct 13, 2008 11:49 pm
Location: Northants

Re: Hard to start

Post by Doggy » Thu Mar 08, 2018 1:32 pm

If replacing, use Bosch or NGK unless you want to do it again real soon......
2003 HDi 2.2 6-speed Exec Estate

1.6 8v
Posts: 19
Joined: Sat Apr 09, 2016 8:48 am

Re: Hard to start

Post by Dano41 » Fri Mar 09, 2018 5:18 pm

It was the plugs folks two dead out of 3, I have only managed to get 3 in so far.That one behind the pump is a bugger.The car starts immediately the heater light goes out.Any ideas of how to get that last plug out.I wish someone had a youtube video on how to do it.Thanks to you all for taking the time to reply.

3.0 24v
Posts: 3671
Joined: Fri Nov 28, 2008 2:30 pm

Re: Hard to start

Post by jasper5 » Fri Mar 09, 2018 6:25 pm

Well done! Glad you got it sorted :)

As for the last plug,,, move the metal injection pipes out of the way and also the rubber pipe that's there if I remember correctly.

Soak the threads with WD40 overnight and do the job when the engine is cooling down but not hot as you will burn yourself.
A long 12mm spanner will help!

Post Reply