Search found 23 matches

by ruwds
Mon Jun 15, 2020 8:36 am
Forum: Interior
Topic: Illuminated Sun Visor and Gear Stick
Replies: 2
Views: 472

Re: Illuminated Sun Visor and Gear Stick

I've seen these two sockets on mine (03' 'S') which I guess is for the sun visors. I believe you have already looked here in the middle light space.
file.JPG
(74.53 KiB) Not downloaded yet
by ruwds
Fri May 29, 2020 11:56 am
Forum: Electrical System and Diagnostics
Topic: Garages that do Cruise Control Retrofit
Replies: 14
Views: 442

Re: Garages that do Cruise Control Retrofit

Just to mention, you could get away with using the existing cowling as it has the outline for the cut out, which you can use to make the opening needed. That is what i did on mine. I am in west London and can help with enabling it if you don't mind waiting couple weeks (just being careful with the c...
by ruwds
Sun May 17, 2020 6:38 pm
Forum: Engine, Clutch and Transmission
Topic: Radiator fan (2002 HDi)
Replies: 39
Views: 9181

Re: Radiator fan (2002 HDi)

Firstly, this thread has been very helpful in gaining some knowledge on how the radiator fan circuit works as I am trying to diagnose an issue on my HDi 90. On mine, the radiator fan seems to be temperamental (discovered while trying to find out why the air con turns off when the engine temperature ...
by ruwds
Thu Aug 23, 2018 12:51 pm
Forum: Electrical System and Diagnostics
Topic: Cruise Retrofit on HDI (90) Siemens 801 Full Mux
Replies: 31
Views: 9718

Re: Cruise Retrofit on HDI (90) Siemens 801 Full Mux

Sorry to jump in on another thread but I thought it was be better than starting a new thread. I know this is the 406 owners club but I have a 307 2.0 HDI GLX with the Siemens SID 801 ECU. I've set speed regulation to active in both the ECU and BSI and I've fitted a cruise control stalk but pressing...
by ruwds
Wed Sep 06, 2017 5:58 pm
Forum: For Sale / Wanted
Topic: Wanted cruise control stalk
Replies: 10
Views: 4243

Re: Wanted cruise control stalk

The lower cowl that comes with the car might have a slight outline on it where the opening should be and can be cut off to create the opening. That's what I did on mine, followed the outline and made the opening. Newer stalks from 307 etc are also told to be suitable with the 406. EDIT: Just realise...
by ruwds
Thu Jul 20, 2017 8:13 am
Forum: Suspension, Steering, Brakes, Wheels and Tyres
Topic: D8 wheels on a D9 car - which wheel nuts?
Replies: 6
Views: 3433

Re: D8 wheels on a D9 car - which wheel nuts?

The early D9's had those alloys that were on your D8... Its even on the 406 accessories brochure called 'Raven Alloy'. http://www.thepeugeotshop.co.uk/pub/files/PDF%27s/1196265797_406_Accessories.pdf Just had a look at the prices at the end of the pdf, and they are actually the most expensive out of...
by ruwds
Mon Jul 10, 2017 8:26 pm
Forum: Electrical System and Diagnostics
Topic: Replacement remote key
Replies: 11
Views: 4822

Re: Replacement remote key

My key's circuit board is 73373067C and the plastic key casing has Valeo stamped on it. Its from a '53 Full mux car...

I was looking at this process to help out a friend about 6 months ago but didn't proceed due to the uncertainty of success. Good to see, someone trying this out :)
by ruwds
Fri Sep 16, 2016 8:16 am
Forum: Electrical System and Diagnostics
Topic: Cruise Retrofit on HDI (90) Siemens 801 Full Mux
Replies: 31
Views: 9718

Re: Cruise Retrofit on HDI (90) Siemens 801 Full Mux

GingerMagic wrote:Good work.
My clutch switch is set to absent, and my cruise control works fine. If I set it to present then I get a clutch switch fault....
Mines a Bosch but I guess the principal is the same.
Thanks for this info. I will do a test maybe in the weekend with setting it to absent.
by ruwds
Fri Sep 16, 2016 8:12 am
Forum: Electrical System and Diagnostics
Topic: Cruise Retrofit on HDI (90) Siemens 801 Full Mux
Replies: 31
Views: 9718

Re: Cruise Retrofit on HDI (90) Siemens 801 Full Mux

I vaguely seem to remember the clutch switch showing up in 2 places when I was doing mine (Bosch 110) but only one of them did anything. Pah, you had all the wiring there already, that's almost cheating :frown: (Nicely done sir!) I need to thank you sir for doing the guide of the full mux car! With...
by ruwds
Thu Sep 15, 2016 11:35 am
Forum: Electrical System and Diagnostics
Topic: Cruise Retrofit on HDI (90) Siemens 801 Full Mux
Replies: 31
Views: 9718

Re: Cruise Retrofit on HDI (90) Siemens 801 Full Mux

Ya, it is well worth the effort to try it out and it get working. Ya, the fault message about the clutch is misleading. It has now appeared again since clearing and doing the test drive but no fault from the ECU etc. Maybe the system will yet function without the clutch input set present on the BSI....
by ruwds
Wed Sep 14, 2016 9:23 pm
Forum: Electrical System and Diagnostics
Topic: Cruise Retrofit on HDI (90) Siemens 801 Full Mux
Replies: 31
Views: 9718

Re: Cruise Retrofit on HDI (90) Siemens 801 Full Mux

So the missing part for the puzzle was indeed the second brake switch. After the switch was fitted to the bracket and adjusted to be set as depressed, cruise control worked on the test drive!! :) :) :) :) So in summary, needed the brake switch, fitting clip and the stalk three settings on pp2000 -> ...
by ruwds
Wed Sep 14, 2016 1:27 pm
Forum: Electrical System and Diagnostics
Topic: Cruise Retrofit on HDI (90) Siemens 801 Full Mux
Replies: 31
Views: 9718

Re: Cruise Retrofit on HDI (90) Siemens 801 Full Mux

Maybe the clutch switch does not work (does not switch). You might want to unplug it and test it with a simple ohm meter. The clutch switch (or any pedal switch) is normally closed (contact). It will open (no contact) when the pedal is pressed. By the way: after the drive, BSI shows - permanent fau...
by ruwds
Wed Sep 14, 2016 10:39 am
Forum: Electrical System and Diagnostics
Topic: Cruise Retrofit on HDI (90) Siemens 801 Full Mux
Replies: 31
Views: 9718

Re: Cruise Retrofit on HDI (90) Siemens 801 Full Mux

Stupid question from me but... did you fit a clutch switch? There is a very good instruction manual here: http://www.406oc.co.uk/viewtopic.php?f=10&t=20756 And you might look here for some other pics: http://www.peugeotforums.com/forums/406-40/406-cruise-install-brake-fault-code-42729/ The car alre...
by ruwds
Tue Sep 13, 2016 9:46 pm
Forum: Electrical System and Diagnostics
Topic: Cruise Retrofit on HDI (90) Siemens 801 Full Mux
Replies: 31
Views: 9718

Re: Cruise Retrofit on HDI (90) Siemens 801 Full Mux

Hi everyone, Thought I'll post here than open a new topic. I am trying to enable cruise control on my car which is a 2003/09 HDI 90 with the Siemens 801 ECU. I have fitted the stalk and activated in ECU (speed regulation -> present) and in BSI (engine -> clutch contact present & misc -> with cruise ...
by ruwds
Tue Jul 26, 2016 7:54 pm
Forum: Electrical System and Diagnostics
Topic: PP2000 in Diagbox
Replies: 11
Views: 3632

Re: PP2000 in Diagbox

Thanks for the clarification. I will give Diagbox a try this weekend. :)