Search found 69 matches

by PhillipM
Tue Feb 19, 2019 5:27 am
Forum: For Sale / Wanted
Topic: Polyurethane Lower Engine Mount - 65mm for V6's etc.
Replies: 0
Views: 25

Polyurethane Lower Engine Mount - 65mm for V6's etc.

Honeycombed polyurethane engine mount for sale - stiffer than standard but the honeycombing creates a nice progressive spring rate so it's not as harsh as solid poly mounts. Centre bosses are machined billet aluminium 6082-T6. Had this one warp in the machine whilst making it, so it's slightly short...
by PhillipM
Tue Feb 12, 2019 2:04 am
Forum: Suspension, Steering, Brakes, Wheels and Tyres
Topic: Intermitent Clunking from N/S front, on Hard right hand turn
Replies: 9
Views: 821

Re: Intermitent Clunking from N/S front, on Hard right hand turn

Tyre catching on the inner arch?

A shot upper engine mount will do it too (the hydraulic one under upper arm) as the engine hops up and down until it rams the rubber through the fluid chamber.
by PhillipM
Sun Jan 13, 2019 6:39 pm
Forum: Bodywork (non-styling)
Topic: going to have a go at welding the sills !
Replies: 21
Views: 717

Re: going to have a go at welding the sills !

Gas mig. Gasless is a pain in the arse as it starts much worse than gasless and you'll have to do more cleanup, TIG is a waste of time unless you cut it back to completely perfectly clean metal and get your repair seamless - and you have it indoors otherwise the wind is a nightmare. Stick welder? Fo...
by PhillipM
Thu Nov 15, 2018 3:26 pm
Forum: General Chat
Topic: New 'stricter' MOTs...
Replies: 31
Views: 2093

Re: New 'stricter' MOTs...

Gonna be interesting with my blue coloured race fluid in then...
by PhillipM
Sat Nov 03, 2018 9:03 pm
Forum: General Chat
Topic: "Maintained regardless of cost." - Pheweeeee
Replies: 3
Views: 377

Re: "Maintained regardless of cost." - Pheweeeee

So far I'm up to about double what I spend on the car in replacement parts :lol:
by PhillipM
Mon Oct 22, 2018 9:33 pm
Forum: For Sale / Wanted
Topic: WANTED: Coolant degassing tank (D8 V6)
Replies: 6
Views: 540

Re: WANTED: Coolant degassing tank (D8 V6)

It's polypropylene, you won't have much luck gluing it permanently outside of a lab, even the stuff you can get commercially for PP bonding just doesn't hold up under high temperatures with aromatics in the mix - they're ultrasonic welded from the factory but....evidently not very well either :D You...
by PhillipM
Mon Oct 22, 2018 4:18 pm
Forum: For Sale / Wanted
Topic: WANTED: Coolant degassing tank (D8 V6)
Replies: 6
Views: 540

Re: WANTED: Coolant degassing tank (D8 V6)

Yes, I've been ssearching all over for something I could adapt, nothing yet. Peugeot don't have any, anywhere, I've been in touch with Pug HQ and they checked all the dealers and warehouses in UK and France for me. So, it looks like a full drain of the cooling system, get it off, and see if I can ei...
by PhillipM
Thu Oct 18, 2018 7:40 pm
Forum: For Sale / Wanted
Topic: WANTED: Coolant degassing tank (D8 V6)
Replies: 6
Views: 540

WANTED: Coolant degassing tank (D8 V6)

After a coolant degassing tank for a D8 V6 - mine has the common leak around the seam, hence I'd prefer a new one if anyone has one stashed away - I know they were really cheap from Peugeot but it seems they're NLA - this type:

Image
by PhillipM
Mon Sep 24, 2018 10:00 pm
Forum: Engine, Clutch and Transmission
Topic: The 70mm lower engine mount bush + gloplugs
Replies: 4
Views: 447

Re: The 70mm lower engine mount bush + gloplugs

Pretty much, I've pushed the 65mm polybushes in before from underneath which is fairly easy, but the 70mm's are tricky because they're right up against the housing when you're trying to get them started.
by PhillipM
Sun Sep 23, 2018 4:26 pm
Forum: Engine, Clutch and Transmission
Topic: The 70mm lower engine mount bush + gloplugs
Replies: 4
Views: 447

Re: The 70mm lower engine mount bush + gloplugs

It's a bit of a pain trying to do it under the car, but it is possible. Honestly it's a lot easier to just whip the shaft and bracket off most of the time though on the XU's
by PhillipM
Thu Sep 20, 2018 2:31 pm
Forum: General Chat
Topic: and today i have mostly been...
Replies: 2324
Views: 160834

Re: and today i have mostly been...

It is, the Merc's just for taking the dogs around :lol:
by PhillipM
Tue Sep 18, 2018 2:47 am
Forum: General Chat
Topic: and today i have mostly been...
Replies: 2324
Views: 160834

Re: and today i have mostly been...

Ouch, I've got an e-class Merc that weighs about the same as a house (it's about 2.5 tonnes or something ridiculus) and even that will run 40mpg just ambling around town, 60 on a run!
by PhillipM
Sun Sep 16, 2018 12:46 am
Forum: Suspension, Steering, Brakes, Wheels and Tyres
Topic: difficulty removing lower suspension ball joint 21mm nut
Replies: 2
Views: 1028

Re: difficulty removing lower suspension ball joint 21mm nut

Jack right next to it on the lower wishbone if you still have the uprights and springs on - the weight of the car pressing down will lock the taper into the wishbone and let you work the nut off.
by PhillipM
Mon Sep 10, 2018 3:36 pm
Forum: For Sale / Wanted
Topic: Polyurethane Insert for V6 gearbox mounts.
Replies: 0
Views: 527

Polyurethane Insert for V6 gearbox mounts.

I'm in the middle of remanufacturing the gearbox mounts for the V6's since they're tricky to get hold of now, but as they work out a bit pricey due to the size of them and having plates laser cut, I came up with a quick interim solution for those either with old worn mounts or just wanting to stiffe...
by PhillipM
Fri Aug 10, 2018 3:33 pm
Forum: General Chat
Topic: and today i have mostly been...
Replies: 2324
Views: 160834

Re: and today i have mostly been...

Polybushing is very good for cars with old knackered rubber ones, currently eyeing a full set for my Volvo, the resulting change in feel/dynamics is supposed to be excellent and very 'new car' like. Yes, I don't usually like them because of the friction they introduce to the suspension, but I've go...